help with ambit 200

jennywren

Inactive User
Joined
Feb 4, 2006
Messages
55
Reaction score
0
hi im atempting to clone my first 200 but all i get is this
Detected CPU .............. BCM3348A1
Ebi Initialized .....................000002020000001C
Sdram Initialized....................
Icache Size: ....................2000
Icache Linesize:.................0010
Dcache Size: ....................2000
Dcache Linesize:.................0010
Sdram access OK......................
Compressed Bootloader detected.......
ImageCSize: ...................007666
ImageLoc: ...................81F80000
Decompression Status: .......00000000
Dcompressed Image Size:......00014995
BSS Initialized......................
TMP Stack initialized................
Perm Stack initialized...............
MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: 3348


Broadcom BootLoader Version: 3.13.2
Build Date: Dec 28 2002
Build Time: 12:22:36

HCS failed on Image 1 Program Header

Image 2 Program Header:
Signature: 3348
Control: 0000
Major Rev: 0002
Minor Rev: 0001
Build Time: 2005/5/11 09:09:58 Z
File Length: 690704 bytes
Load Address: 80010000
Filename: vxram_sto.bin
HCS: e8c9
CRC: 7eb5163e



Enter '1', '2', or 'p' within 2 seconds or take default...
.


Board IP Address [0.0.0.0]: 192.168.100.10

Board IP Mask [255.255.255.0]:

Board IP Gateway [0.0.0.0]:

Board MAC Address [00:10:18:ff:ff:ff]:

Internal/External phy? (i/e)


Init EMAC, DMA, and MII PHY...
Autonegotiation started, waiting for completion...Autonegotiation successful...
MAC setup for FullDuplex


Main Menu:
==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
b) Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory

TFTP Get Selected

Board TFTP Server IP Address [0.0.0.0]: 192.168.100.10
Enter TFTP filename []: X2_Build128.bin


Free store: a0300000
Starting TFTP of X2_Build128.bin from 192.168.100.10
Getting X2_Build128.bin using octet mode
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Tftp timeout...
Retry limit exceeded on block 1....Aborting session
Store parameters to flash ? [n]



can someone please help
 
Enter '1', '2', or 'p' within 2 seconds or take default...
.


Board IP Address [0.0.0.0]: 192.168.100.10

Board IP Mask [255.255.255.0]:

---------------------------------------------


Board Ip Adrdress should be 192.168.100.1

Your IP may be conflicting.

Providing your settings in tftpd32 are correct then it should send file to your modem.
 
dont have any firewalls running this plays the tftp server up,also check the network card is configured properly.
 
Back
Top