- Joined
- Sep 16, 2014
- Messages
- 2,601
- Reaction score
- 1,674
Downloads: A new file has been added by ketmp:
CLICK HERE TO DOWNLOAD >>>>> OpenVix Apollo 127 - Sunray Solo2 & few others!
CLICK HERE TO DOWNLOAD >>>>> OpenVix Apollo 127 - Sunray Solo2 & few others!
Vix Apollo 127
(for Sunray Solo2, Solo2 SE** or Solo2 (with v4 flash)**)
Source Date: 20/01/15
Kernel: 3.13.5
Drivers: 09/01/15 (patched)
This is my working backup of OpenVix Apollo. I created it by replacing drivers with latest patched drivers at the time. It is basically a plain Vix Apollo with no customisation except for adding TSMedia, Picons and MGCamD 1.38 (along with mg_cfg config file). You will need to customise it further yourself. Alternatively, if you don't like my customisation then you can reset back to defaults and setup as you require.
I recommend backing up your current image first before flashing with this image.
Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!
Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched drivers and Gjstroom for patching driver version).
** I have had reports that this image is safe for use on Solo2 SE and Solo2 (with v4 flash only). However, I can't confirm this as I only have a Sunray Solo2 therefore I accept no responsibility for use on these other Solo2's. Use at your own risk!
(for Sunray Solo2, Solo2 SE** or Solo2 (with v4 flash)**)
Source Date: 20/01/15
Kernel: 3.13.5
Drivers: 09/01/15 (patched)
This is my working backup of OpenVix Apollo. I created it by replacing drivers with latest patched drivers at the time. It is basically a plain Vix Apollo with no customisation except for adding TSMedia, Picons and MGCamD 1.38 (along with mg_cfg config file). You will need to customise it further yourself. Alternatively, if you don't like my customisation then you can reset back to defaults and setup as you require.
I recommend backing up your current image first before flashing with this image.
Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!
Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched drivers and Gjstroom for patching driver version).
** I have had reports that this image is safe for use on Solo2 SE and Solo2 (with v4 flash only). However, I can't confirm this as I only have a Sunray Solo2 therefore I accept no responsibility for use on these other Solo2's. Use at your own risk!
Last edited by a moderator: