A tip for Athlon XP builders

Spectre

Administrator
Staff member
Jnr Admin
Joined
Jun 3, 2001
Messages
41,222
Reaction score
5,596
Location
Airstrip One
Although lots of motherboards can take the Athlon XP processor, the BIOS will need to be flashed with an updated BIOS image before the system can be booted successfully (As I found out LOL) <img src="wink.gif" border="0">

The catch is that the board must be booted up to the point where you can use a system disk to get a DOS prompt to run the flash utility <img src="smile.gif" border="0"> or it just hangs <img src="eek.gif" border="0">

So make sure you have a processor to hand which the board will support...just to boot it <img src="smile.gif" border="0">
 
I am in the process of building my third machine at the moment. I am buying a part at a time as the money flow allows. I bought a Giga GA-7DX a few weeks ago and this morning I ordered an AMD 1700XP over the net from Planet Micro. Can you forsee any clashes when it comes to introducing these two components together?
 
I have just built my self a new pc using a gigabyte GA-7VTXE (Dual Bios) mother board complete with athalon XP 1700 Processor.

I can personally say I had no real probs ....

regards Taff
 
Sorry guys, I should have eXPlained a little more...

Some MBs will run the XP chip OK (If they are new and specifically support it), some run it as a normal Athlon and some like the Asus A7M 266 <br />(V 1004A and older) won't run it at all until the BIOS is flashed.

Grille your supplier for info 'cos I wouldn't want anyone to be as dissapointed as I was when it wouldn't boot...OK now though... <img src="smile.gif" border="0">

[ 11 December 2001: Message edited by: Spectre ]</p>
 
hi guys,<br />all new gigabyte motherboards come with a flash update tool on the install disk, this allows u to auto update ur bios online(searches for any update for you mobo type),automaticly without the old probs of flashing ur rom.hope this eases some worries.<br />owenzy. <img src="smile.gif" border="0">

[ 11 December 2001: Message edited by: owenzy ]</p>
 
Back
Top