To enter cws line via mini web, you needs to go into the mini web interface by powering of the receiver. Then switch it back on with the power button held in till three digits appear, this is what you enter to form the receiver ip address, for instance 10.0.0.106
(these are different depending on your receivers ip). Enter this into your browser address and hit enter/return.This will open up the miniweb interface as shown below:~
You will then scroll down where it says Mgcamd,
Then select edit,
That will bring up the mgcamd page below:~
Just copy and pastes the CWS line in the add line section at the top,
If you was give a N:Line just change the N: for CWS:
Once pasted press Add line,
the page will reload
save and exit,
reboot,
job done