TM 6900 in a loop

[betas]

I think my tm6900 gone up the s@it creek been working since last week but today no picture through hdmi,scart or yellow phono the display goes in a loo blue circle is lit all the time Tecnomate 5sec 1080i 5sec tv screen the 0001 and 9 on the left keeps doing this.
i have now put s/w in again with rs232 same When a patch is being loaded it shows on tv any help would be welcome.

 

[Zorch]

Hi betas,

Try this... switch the TM 6900 'Off' using the power switch on the rear of the receiver... then press and hold down the 'Menu' button on the front of the receiver as you switch the TM 6900 back 'On' using the power switch on the rear of the receiver... you will then see the 'Loader Menu' on screen... try the 'Factory Reset' option on the list and see what happens... also try the 'USB Download' option... I hope this helps...

Best Wishes,
Zorch

 

[betas]

A very big Thank very much all ok

 

[DrRu62]

Old thread but this just happened to me and......you fixed it without knowing!!!! Cheers