Powersync from TMC (yellow)

[dash]

Hi any advice on this product from TMC what do i need to do please.
Has it been flashed or not?

 

[tmc]

Ready and set up.

tmc

 

[dash]

cheers for the info m8:banana:

 

[dash]

is anybody know which flash is been loaded in this new powersyn from TMC?

 

[dash]

advice please on the flash loaded in this looper.pleeeeeeeeeeeease

 

[TBC]

the latest uk generally released flash i beleive would be newd11x so it is safe to assume that unless you requested otherwise it is newd11x on the powersync. left over from a general function test after manufacture

 

[dash]

cheers m8 for the info..........

 

[dash]

so if i want to open my A86 cards then what VCC or VDC setting i should do on the powersync?

Or if i want to reload my flash which dip switch i should leave to on position?

 

[dash]

help pleeeeeease.

 

[Nightcrawler1]

i have one of these they do exactly as it says on the tin as to speak its ready to glitch works everytime im not sure which it is to flash i remember reading it was 5 but dont quote me on that

 

[tmc]

For a86 you will need to flash it with tbc flash and use his rom10 script. If you have a 4 way dip switch the to flash all off if its 6 way then 5 on. To unloop dip switch 1.

tmc

 

[dash]

Have u got the TBC script, if yes please can u pass it to me please.

 

[TBC]

first use the flash and script in the double tbc folder, if the card gives excessive rsts then use the flash and script in the p47 folder (don't mix them up)

tbc

obviously you can use newd11x with the script in the p47 folder also.

 

[dash]

Thank u very TBC will have ago right now.

 

[dash]

How much VDC on my pot i should adjuct on my looper with NDD9 flash?

 

[dash]

Hi TBC i am getting RST 5,6,7,8s this alright an VCC 19 and 1A?

 

[TBC]

Hi TBC i am getting RST 5,6,7,8s this alright an VCC 19 and 1A?

as long as they aint all next to each other lol, you should not have more than 15 rsts per delay.

 

[dash]

Hi TBC i am getting 5 to 6 RST on each delays and my VCC is 20,1f,1e and 1d does this looks okayPot settins is in range of (VDC) 0.50 - 0.54

 

[TBC]

just leave it and see if it opens lol, if it wasn't right it won't open

 

[dash]

How much VCC u should reckon i should keep and VDC on my looper and i am using my looper setting on parameter setting in winexplorer.