I ask you, professionals, this idea is possible? or not possible?
http://www.digitalworldz.co.uk/vu-solo2-receivers-633/378201-anyone-got-chinese-vu-post2416697.html#post2416697
Might be trying it...Is anyone be able to try this?Has anyone got the gears?
And here is the mtd3.zip upload from @edogg http://www.digitalworldz.co.uk/attachment.php?attachmentid=80754&d=1398260208
And like i said i send the questions to the Chinese guy and he promissed me to give this to the engineer whom is involved in the solving,fingers cross he answers..
I was wondering I own a openbox s9 and when these got bricked one way of restoring them was to connect a working one to a none working one with a r232 cable with the none working one turned we then turned the working one on and they would download so maybe this would work or use the cable that comes with the solo2 it must be used for something because the real solo2 does not come with the cable
Guys what's to say the manufacturers have not already tried the JTAG themselves. That might be why they are saying chip replacement
Sent from my Nexus 5 using Tapatalk
Guys what's to say the manufacturers have not already tried the JTAG themselves. That might be why they are saying chip replacement
Sent from my Nexus 5 using Tapatalk
It's possible they have tried this. But I don't see any reason why JTAG wouldn't work unless they haven't implemented the JTAG properly on the clone boards.. Or if the NAND is write protected they may not be able to remove the write protection. Its already proven that original duo and solo receivers with damaged bootloaders can be restored via JTAG and BBS tools.
Also I don't believe the guys we are contacting are in a position to really help us.. They are small resellers they are not the manufactures, they probably don't have the tools or know how to try a JTAG solution.
Lonrisun should be developing a fix which they then hand down to there resellers. The fix if possible will take time won't be overnight.
not sure will help or not but have connected to same port with old phone cable (as I have problem with my dvd when load wrong software and fixed by that) and use MTKtool heave a log LOG: Start to upgrade"JTAG" pinout p701 4pin spits out something, HEX.. try´d to connect referring to this thread
Jtag pinout mips-BCM7538(STB Kaon) - USB JTAG
but i just used a very simple usb rs232 uart.. and without 3.3v ... because i dont really know what im doing..
with the other p403 10 Pin, i had no luck with that:
Actel FlashPro JTAG
hex output
Code:You don't have permission to view the code content. Log in or register now.
View attachment 80744View attachment 80745
regards
We use essential cookies to make this site work, and optional cookies to enhance your experience.