Orange nexus will go in the bin if this carries on

[Gun_Man]

Hey guys
I have tried to fix this box of mine before and gave up twice because no one and I mean no one can explane to me how my Orange nexus T911 works.
So I have flashed the chips on it. That went well. Then I installed sct10en.exe that I think went ok. Then I run WinExplorer and used the keygen to get it working. Once working I selected my T911 from the drop down menu and opened a script. By the way I have a phoenix card reader and a nexus due to the fact that i do not have a clue what I am doing and was convinced that i had brought the wrong thing to start with. So if it is easier with one or the other please let me know. When I tried to open the card with Nagra edit it says this:

ROM Revision: 011
EEPROM Revision: RevB0D
CAM Date: 1F68
Closing of COM1 was successful

So it must be a ROM11 and the script that I was using was “5C01 Rom11 BOC”. But once I run the script after about 5 seconds I get a error message saying:
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 150
Sc.GetByte: Requested Byte Exceeds Last Read Request

In the top right section of the window it shows where in the script it stopped and this is what that part says:

Bytes = Sc.Getbyte(1)
if Bytes > 8 then
Sc.Read(11)
'bytes=sc.getbyte(8)
'PRINT HexString(bytes, 2)
end if
Please, please can some one help me out with this? It’s driving me nuts.

 

[wonko]

use a B0D script - ones for B0C wont unlock this card

 

[irratic]

just use sidewinder program it should open that card in under a minute..

 

[neorage]

if ur going to throw it away throw it my way lol

sorry im not much help never had an unlooper never botherd to get one as only ever had 4001 or s2100

 

[Gun_Man]

So I downloaded sidewinder and it looks like its running. Just a CMD window with port detected and in the mid of the window its says

Loader inspector


testing.......0C (loads of different combinations)

Is this right?
Iif so how long do I have to wait?

 

[dont do it it"ll hurt]

it should start with in 30 secs m8 if not get the other sidewinder

 

[irratic]

has it started???you should get +++++++rst10+++rst5
or something like that

 

[Gun_Man]

nope just says testing its getting right on my tits
do you have the BOD script that works with winexplorer that i can use please?

 

[dont do it it"ll hurt]

here you go

 

[Gun_Man]

ok i took some screen shots for you guys so you can see what i am seeing here.

 

[dont do it it"ll hurt]

when it says bugs zerod its done m8

 

[irratic]

clean the chip on the card with a dry cloth and try it again...

 

[nickgen]

also i think you said in winexplorer you selected t911 in the settings thats incorrect you need to select my unlooperfor it to work correctly.

 

[wonko]

unable to detect provider in standard B0D script generally means incorrect flash (need newd11x) but could also mean card is toast I suppose - no idea about sidewider output as never used it

 

[yorkie1]

what sort of unlooper or hardware do i need to use this software in abve posta i have quite a few rom11 and rom 10 but havn't a cluw what to do with them


can anyone help

 

[Gun_Man]

Ok so i started sidewinder last night at 11:30pm and i stopped it today at 4:45pm and it had still not unlooped. I am sure that i am doing something very wrong. Please i am at the end of my tether with this can some one who knows how to do this please PM with a contact number or Skype contact so i can go through this step by step. thank you.