Can anybody help me with what the difference is between these two. I've done some research but it doesnt seem clear for me still.
Thanks
Nline can be run in mgcamd/oscam the advantage over CCcam is those two can run a cache system taking some load of the cards on the server. This could reduce ecm glitching.
I thought CLine could be run on Oscam?
If the server is using 'genuine' CCcam then that's correct, if however the server is using OScam as the basis for the CCcam server (as is more often than not the case these days) then it can fully support the ecm cache.
This is where the confusion seems to be going on previous threads and this. What you are using at the client end really doesn't matter providing it supports the protocol you need - What is being used at the server side (and how it's configured) is important depending on what you need it to do.
As regards being a CLIENT ONLY then:
CCcam 2.3.0 supports CCcam, Newcamd and Mgcamd (including more than one service at once)
OScam supports CCcam, Newcamd, Mgcamd and more (including more than one service at once)
Mgcamd supports CCcam, Newcamd, Mgcamd (generally not with more than one service and struggles with later Enigma2 builds that are appearing now)
Your never going to be issued a cline unless they run a pure CCcam server.
This again after trying to explain it before to you is why servers are reluctant to allow the use of CCcam as a client. Most dont FACT.
OScam when used as the server is able to support CCcam, Newcamd and Mgcamd protocols - The CCcam protocol can also support multiple CAIDs via a single port (as can Mgcamd) so there are many instances where the server will be using OScam to provide C lines.
Using the word FACT in capitals does not make it any more true or correct, it's not and far from you try to explain to me I have tried to explain to you (and it appears failed in) what is actually the case.
An Oscam server to CCcam client setup will not use cache.
Go ask the lads running Oscam or Newcamd servers what they think to CCcam as a client. They will tell you to use mgcamd and Oscam particularly those using Nagra cards that dont handle traffic as well as others and rely on ecm cache.
I posted this on another forum, hope its helpful
The softcams use a protocol to connect to the server and get the keys to clear your channels, the 2 common protocols are cccam and newcamd
Now for softcam configuration and about the famous c or n line
CCCAM uses the cccam.cfg file - which has configuration settings and server details, as an example
for a nline in cccam
N: <server name> <port> <username> <password> 01 02 03 04 05 06 07 08 09 10 11 12 13 14
for a cline in cccam
C: <server name> <port> <username> <password>
MGCAMD uses the newcamd.list and mg_cfg file - newcamd.list for server details and mg_cfg for configuration settings
newcamd.list is where you enter details for your servers, as follows
CWS = <server name> <port> <username> <password> 1234567891011121314
FTP var/keys.Hi Guys, hopefully someone will see this.
I am trying to setup a zgemma and transfer my line.
Have tried numerous solutions in usr\keys but none work.
Any help would be greatly appreciated..
N: hostname.server.com 48723 Username Password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
thank you
We use essential cookies to make this site work, and optional cookies to enhance your experience.