Cardsharing on technomate 6900 6800 super with SSSP and 8281

[digidude]

the 68/900 supers only have newcamd protocol on them m8

 

[db49er]

Thanks - do you think that is likely to change in the future?

 

[digidude]

no way of knowing really m8

 

[Joron]

Hi guys, I have connceted pc to receiver with rs232 null modem cable TM-6900 combo & wsp all i'm getting this message can some help me please or what does it mean ....Thanks


[1:15:22 PM] Server1 : TX: 0040714CC42A76C7640E29DBE2BB03F16D6ADEF957334F6B9F1E958801565522C639BB95AA2776E8ED592030844CCCEF282CA12FD888DFD3CE23253A3DBEBA5DB8DF
[1:15:22 PM] Server1 : Can't get login answer...
[1:15:28 PM] Server1 : Connecting to server...
[1:15:28 PM] Server1 : Connected to serwer, getting mod key...
[1:15:28 PM] Server1 : Mod Key: 8A6C64B8739F864BD316C2600167
[1:15:28 PM] Server1 : TX: 00404421DE287F32E0A88175513A39BDF4E6AE6A122AF9AE58FA08C2B9C1FE6F283D699E4F3C96E5A483E938EE4CF6F0DB477362BDCF2B83048A1303CE635F3CF6AE
[1:15:28 PM] Server1 : Can't get login answer...

 

[viper811]

Hello all, im struggling with getting my head round all this, lol.
I press 8281 on my remote when viewing a channel and nothing happens, i have uploaded the latest patch but i cant upload softcam via usb, i have a tm6900 super combo hd with darkmotor on 100cm dish. I have connected to ethernet but dont know what figures to put in. Can anyone save my sanity? Pleeeeeeeeze.

 

[digidude]

Hello all, im struggling with getting my head round all this, lol.
I press 8281 on my remote when viewing a channel and nothing happens, i have uploaded the latest patch but i cant upload softcam via usb, i have a tm6900 super combo hd with darkmotor on 100cm dish. I have connected to ethernet but dont know what figures to put in. Can anyone save my sanity? Pleeeeeeeeze.

sounds like the patch aint active m8

on the remote, press menu, then highlight system info and press OK, now you should be able to see 2 'buttons' on the screen below all the details, cas menu and biss menu, if not (which sounds likley) on the remote press the numbers 2 0 0 4 and theyll appear

now youll be able to load a softcam file from usb and be able to access the 8281 share menu, as well as the 8280 shortcut to access the biss menu and mute then exit to access the cas menu from any channel

good luck

 

[Joron]

Hi digidude, can you help me please running WSP v0.9.6 my problem is when I connect to server1 Protocol camd3(cs357) connecting to server(green) but change to newcamd (red) below I have put responce

with (newcamd)
[10:43:01 PM] Server1 : Connected to serwer, getting mod key...
[10:43:01 PM] Server1 : Mod Key: F5D493A3DA864BD316C260016701
[10:43:01 PM] Server1 : TX: 0050E355FDB4612D24CB24970D1C4F0B7459EB2113911BD63E737C12C200DAF659724663D7C691754178BF04824C08C18228553CDB2087729F1175C342CAC7336C574ED0589FBBE76242E0C72964EBE8FBEE
[10:43:02 PM] Server1 : Can't get login answer...

with camd3(cs357)
[10:47:45 PM] Tuner1 : Port closed!
[10:47:49 PM] Tuner2 : Port opened!
[10:48:15 PM] Tuner2 : PID: 01001B11FEBAA5BA5A05000262021B000500026302521005000261018800
[10:48:15 PM] Tuner2 : PID: 01001B11FEBAA5BA5A05000262021B000500026302521005000261018800

can you please help how to conncet to newcamd or what I'm doing wrong STB is TM-6900 HD Combo
Thanks Jay :Cheers:

 

[viper811]

Thanks a million Digidude, you obviously know your stuff. I did as you suggetsed and it came on straight away. Dont suppose you could explain what the biss and cas menu are for? I know it may seem like a daft question but being a newbie im trying to understand as much as i can. Thanks in advance to any help given.

 

[digidude]

@ viper

the biss and cas menus hold the keys that unlock certain channels, you can change these manually by going through them and editing with the remote, or by loading a Tmsoftcam file, not all listed keys will be active, in fact, most of them are no good any more

@ joron

have you entered the DES key in the bottom box, and your user and password details in the top box on the computer software

 

[Joron]

@ joron

have you entered the DES key in the bottom box, and your user and password details in the top box on the computer software

Hi digidude,

Host or Adders=or****.g*****.org
Login=P*****1---P*****3
Password=p*****
port=1000-1001-1002-1003
deskey010203========1314

I can't get connect through Protocol:NEWCAMD (Red)
protocol:camd3(cs357) Green...I can't get this going past towdays I have 3stb TM-6900HD COMBO NO SUPER & TM-1500CI & TM-60002X2CI I want at least on stb to work thanks...

 

[Joron]

at last it's working clearing sexview...Ta

 

[carrpet]

you have to set up a sly card on the server end to the right clock speed for the card other wise you will get freeze its very easy to set up c/s on any system use cccam as its the one with most support and very easy script to use

Hi Dickie1968, I have a DreamBox running CCCam which has no picture freezing on S*y but when CS with my 6900 super the picture freezes about every 10 seconds, Does this mean I need to change my clock speed on the DM ?

 

[digidude]

this is an issue with the technomate

 

[carrpet]

this is an issue with the technomate

Hi Digidude, thanks for the feedback. Is it possible that this problem could be fixed with subsequent firmware updates ? Do you know if MAGIC is aware of the problem ?

 

[Joron]

Hi digidude...
how to TM-600CX 2ci activate secret menu like if you type 8281 while watching any channel in fullscreen mode on TM-9100 guys I have learn a bit since I have join Thanks....

 

[dobby]

technomate 6900 hd super & bt homehub

hi guys iwas wondering if anybody has set up their 6900 to card share using the 1.5 bt home hub(2nd gen white one) i have a mate who has the same set up as me but we can't seem to get it grafting ,any ideas, i have tried everthing but to no avail
cheers-dobby

 

[wolftje]

Re: Cardsharing on technomate 6900HD SUPER + SKY NDS

I can confirm that the problem lays with the implementation of the newcamdprotocol of the TM6000 series Super.
NDS freezes every 10 seconds
But
When using Newcamd built-in the New DiabloCam Wifi. it works Flawless on
the TM6900HD USB SUPER even when using old original Technomate Firmware
or the latest new firmware.
Same goes for the Darkman Patched Firmware in combination with the Diablocam WIFI.

 

[bickerton]

Can someone give me a clue as to what is possible with my setup? I have a PC in room 1 connected via cable to TM1500ci+ in room 2.

I have a lap top in room 3 and a TM6900HD Supercombo with a diablo wificam.

The router is in the hall but I cant run an ethernet cable to the TM6900 (wife would object)
Truth is I've now got the kit but I dont know how flexible I could make the viewing and sharing?

any help or advice appreciated.

 

[xxxxxx]

can anyone show me a picture of the new wifi being program in the cas interface 3 as can not understane how far the dummy card reader gose into the cam as the wifi cam looks a lot longer than the diablo2.3 normal cam. will i have to buy a new cas interfase or can i do it with the cas interface 3. for give me if i have posted in the wrong section i hope i have not. please help me thank you for your help.

 

[Shield10]

m8 there is no need for dummy card good luck:lsabre: