osborne82
Inactive User
- Joined
- Nov 16, 2005
- Messages
- 1,293
- Reaction score
- 88
raj said:hello Zaf , the message is " this service does not currently send a signal "
although the channel range is not i believe full . Do you think its my signal level
the snr varies between 65-70 % most of the time , but i checked it on nt box in their eng menu its about the same. Just to be sure I soldered the inner connection on the coax connection .
How can i be dead cert I am in telewest area , can i check in eng menu in original box ? what do i look for ?
And which bouteq file is assigned for which areas please , I used the following files , : gemini 2.9 flash an and the file u sent me to put in var /temp folder , i just drag and dropped them and then rebooted the dream box.
Or am i missing keys as when i look in key folder its empty .....how do i get them please if thats the case ? thanks for your help .
almost there m8 u need to copy the cables.xml that zaf posted and place in var/etc NOT /var/tmp as anything in the tmp folder gets deleted upon reboot.
if u flashed a backup from the downloads section on here then it should all be set up for AU ing but if u want to look at the keys u may press menu then info then stream info it will then tell u the keys but u shouldnt need to really deal with any of that as it will update on its own.
but getting back ontrack if u copy that cables.xml over then reboot when u go to scan again it will should only give u one option "bruteforce" this way u wont need to know what provider u have ie ntl or telewest it should just scan for everything although please note this way of scanning does take alot longer as it scans everything
also it may be worth double checking all your connections to the dreambox remove any splitters, attenuators just to be sure
hope this helps
osborne82