DM500S + CCcam configs not clearing Setanta Ire /Sport

[Fulgas]

Hi Guys,

Can you have a look at the below configs on my DM500s and let me know what I am doing wrong. All premiuim channels are showing except Setanta Ire and setanta Sport

Thank you


SERVER LISTEN PORT : xxxxxx
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : xxxxxxxxxx
WEBINFO PASSWORD : xxxxxxxxxxxxx
TELNETINFO USERNAME : xxxxxxxxxxxxxxxx
TELNETINFO PASSWORD : xxxxxxxxxxxxxxxxxxx
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME : xxxxxxxxxx
OSD PASSWORD : xxxxxxxxxxxxx
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
MINI OSD : yes
BOXKEY: /dev/sci0 xx xx xx xx
PIN : /dev/sci0 xxxx
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/keys/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 34700000
MINIMUM CLIENT VERSION : 2.0.1
EMM THREADS : 4
MINIMUM DOWNHOPS: 1
#LOG WARNINGS : /tmp/warnings.txt

 

[theblueirish]

is it working in the sly box? Setanta not paired to the box

 

[Fulgas]

Hi Mate,

It is working fine in the Skybox

Thank you

is it working in the sly box? Setanta not paired to the box

 

[CoolHandLuke]

SERVER LISTEN PORT : xxxxxx
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : xxxxx
WEBINFO PASSWORD : xxxxxx
WEBINFO LISTEN PORT : xxxxxx
TELNETINFO USERNAME : xxxxxxx
TELNETINFO PASSWORD : xxxxx
TELNETINFO LISTEN PORT : 16000
OSD USERNAME : xxxxx
OSD PASSWORD : xxxxx
ZAP OSD TIME :5
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
EMM THREADS : 1
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : yes
MINIMUM DOWNHOPS: 1
BOXKEY: /dev/sci0 xx xx xx xx
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinf
LOG WARNINGS : /tmp/warnings.txt


Here's my config never had a problem obviously im using a internal slot on a DM so the only thing that is different on yours is ?


BOXKEY: /dev/sci0 xx xx xx xx
PIN : /dev/sci0 xxxx
LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 34700000

So you might want to check them Ive never used a PIN or needed load balance, you could use oscam to read your card then you would clear pick tv and few other channels your missing using Cccam.

 

[Fulgas]

Hi CoolHandluke,

I am also using the internal slot. So i need to take out the following lines
BOXKEY: /dev/sci0 xx xx xx xx
PIN : /dev/sci0 xxxx
LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 34700000

I am going to try and keep posted posted

cheers

SERVER LISTEN PORT : xxxxxx
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : xxxxx
WEBINFO PASSWORD : xxxxxx
WEBINFO LISTEN PORT : xxxxxx
TELNETINFO USERNAME : xxxxxxx
TELNETINFO PASSWORD : xxxxx
TELNETINFO LISTEN PORT : 16000
OSD USERNAME : xxxxx
OSD PASSWORD : xxxxx
ZAP OSD TIME :5
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
EMM THREADS : 1
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : yes
MINIMUM DOWNHOPS: 1
BOXKEY: /dev/sci0 xx xx xx xx
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinf
LOG WARNINGS : /tmp/warnings.txt


Here's my config never had a problem obviously im using a internal slot on a DM so the only thing that is different on yours is ?


BOXKEY: /dev/sci0 xx xx xx xx
PIN : /dev/sci0 xxxx
LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 34700000

So you might want to check them Ive never used a PIN or needed load balance, you could use oscam to read your card then you would clear pick tv and few other channels your missing using Cccam.

 

[Fulgas]

Sorry mate,

Back on this. Am confused here. Did you mean to change the following?

BOXKEY: /dev/sci0 xx xx xx xx
#PIN : /dev/sci0 xxxx
#LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1 # not needed for internal slot
SMARTCARD CLOCK FREQUENCY: /dev/sci0 34700000 instead?


Thank you

Hi CoolHandluke,

I am also using the internal slot. So i need to take out the following lines
BOXKEY: /dev/sci0 xx xx xx xx
PIN : /dev/sci0 xxxx
LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 34700000

I am going to try and keep posted posted

cheers

 

[CoolHandLuke]

yes delete ?

#PIN : /dev/sci0 xxxx
#LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1 # not needed for internal slot ? NO

And what box you using I would not even set a clock freq if your using an internal slot most boxes are set below 5 mhz to read your card anyway, I use oscam on one box and overclock the card to 6mhz its always been fine receives emms better to update the card lol

Why dont you just copy and paste my config in your box and set your box key and web info etc etc will be much quicker...

 

[Fulgas]

Thank you

I will do so. I am using a clone DM500s

Cheers

yes delete ?

#PIN : /dev/sci0 xxxx
#LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1 # not needed for internal slot ? NO

And what box you using I would not even set a clock freq if your using an internal slot is it a DM 500 etc

Why dont you just copy and paste my config in your box and set your box key and web info etc etc will be much quicker...

 

[Fulgas]

Hi All,

Need extra subscription for those two channels. Sky gave a number that I called and paid ...Since everything is fine...


Sorry for the delay

 

[Fulgas]

Thank you mate

Thank you

I will do so. I am using a clone DM500s

Cheers

 

[wiz569]

Hi All,

Need extra subscription for those two channels. Sky gave a number that I called and paid ...Since everything is fine...


Sorry for the delay

Then they could not have been working fine in the Skybox like you said?

 

[Fulgas]

Thank you

All sorted now. Was away for sometimes

yes delete ?

#PIN : /dev/sci0 xxxx
#LOADBALANCE : /dev/ttyUSB0 /dev/ttyUSB1 # not needed for internal slot ? NO

And what box you using I would not even set a clock freq if your using an internal slot most boxes are set below 5 mhz to read your card anyway, I use oscam on one box and overclock the card to 6mhz its always been fine receives emms better to update the card lol

Why dont you just copy and paste my config in your box and set your box key and web info etc etc will be much quicker...