TM 5402 HD Power Supply

J

jaymes

Inactive User
Joined
Jun 13, 2005
Messages
257
Reaction score
171
Location
Midlands
Hi guys.

My TM 5402 packed up over the weekend, absolutely dead. Had a look found the following:-

Fuse blown.
C7 470mf bulging.
Bridge diode D4 Short Circuit.

Relaced above and reservoir capacitor 47mf 450v as a precationary measure.

Now I have some life in the receiver. Its stuck in standy, red light flashing.
Conected to PC with Null Modem Cable
Tried force download, switching on while holding on button in front, no joy.

Suspect maybe a problem still with Power Supply. Due to nature of fault may have damaged FET.
Anyone know where I can get a TM 5402 HD Power Supply.
 
Try contacting Tecnomate I read recently somebody bought a new supply for a TM6900 for about £25 and it arrived in a couple of days.
Mind you that's a obsolete model so they may be selling them cheap.

I have TM6900 and the output voltages of the supply are marked on the circuit board.
Perhaps you can measure the voltages it may give a clue to the fault.
Maybe a faukty cap or diode.
 
stroker said:
Try contacting Tecnomate I read recently somebody bought a new supply for a TM6900 for about £25 and it arrived in a couple of days.
Mind you that's a obsolete model so they may be selling them cheap.

I have TM6900 and the output voltages of the supply are marked on the circuit board.
Perhaps you can measure the voltages it may give a clue to the fault.
Maybe a faukty cap or diode.
Click to expand...

Thanks for that
As mentioned above have found some faulty component and replaced. Looks like its had quite a surge.

@manic01

Will do.
 
Direct from Technomate would be best bet m8, if youve replaced the obvious damage and still not working, at least youd then have a price for a replacement, and would know wether its worth looking deeper at the PSU, or simply replacing it
 
I bought a power supply for my tm-6800s+ last year direct from technomate. Delivery was rapid cost was approx £40 once delivery was added.
 
digidude said:
Direct from Technomate would be best bet m8, if youve replaced the obvious damage and still not working, at least youd then have a price for a replacement, and would know wether its worth looking deeper at the PSU, or simply replacing it
Click to expand...

Hi mate

Emailed this morning for a quote for Power Supply and got the following:-

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

[email protected]

Is there a different email address

Thanks
jaymes
 
You can contact them with an online form at technomate.com, click contact us and then support.

Got these detail from the latest TM6900HD Firmware:-

Tel: 0208 884 0701
Fax: 0208 884 0275

Tecnomate Ltd
Unit 11 Nobel Road Edmonton, London N18 3BH
 
stroker said:
You can contact them with an online form at technomate.com, click contact us and then support.

Got these detail from the latest TM6900HD Firmware:-

Tel: 0208 884 0701
Fax: 0208 884 0275

Tecnomate Ltd
Unit 11 Nobel Road Edmonton, London N18 3BH
Click to expand...

Hi thanks for that

I contacted them with the online form and got:-

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

[email protected]

Will have to phone I guess.
 
digidude said:
Direct from Technomate would be best bet m8, if youve replaced the obvious damage and still not working, at least youd then have a price for a replacement, and would know wether its worth looking deeper at the PSU, or simply replacing it
Click to expand...

Hi mate

Been in touch with Ryan. Done me a good deal on PSU, so going for a new PSU. Must say actual support is great. Quick to respond dispatching today should receive tomorrow. Thank you all for your feedback
 
You must log in or register to reply here.
Back
Top