To stop tm800 problems please read this

[LINUX DREAMER]

i was told by iQ team and tm today 07-06-2011
In image 31-05-2011 there has been total change of core and application by iQ team
if any developer or anybody wants to add on anything's from outside of blue panel might get blue screen or other problems
At this moment iQ team is writing a new image and fixing multimedia and streaming will take about a week.
svn will be oprative within next 7 days.
After svn open anybody can use any addon /EPG /Etc was made for UR can ad to iQ next image without any problem your hardwork is not wasted
in the mean time anybody wants to download 31-05-11 image please only for temporary solution,
use below instruction other wise will get toomany problems.
=======================================
Fallow below advise line by line tm800 will not get green screen or hung-ups and no problems
1-use only countenance of blue panel all cams are tested
2-use only skins in blue panel all tested OK
3-If you are adding anything do it one at the time if problem go back delete do new image download gain by Only USB
4-Use channel list from blue panel any other imported to tm800 test first if problem sleet one of the channel list or new scan
5-any add-on plagins from outside imported should be download and installed one by one if no good re download image by usb
6-soon there will more selection of skins and add-on plagins
8-To make sure you get 100% result fallow instruction in download center you only do this once until next image
=======================
How to get 100% best result
and be happy with your TM-800 HD
Go to this link and download latest software 31-05-2011 by USB then fallow wizard and download
default channel lint.
Download center
--------------------------
How to download by USB
only to TM-800 HD Linux

1-Save tm-800 image in USB do not use folder re name like this >>> TM800_update.bin
2-Turn on from rear
3-As soon as you see starting press stand by button many times see mini root and wait
4-Wait until you See box ip in the front panel scrolling then press menu button .
it will take about 2 minutes see success then take USB out. wait for re boot

=============================
1-Download by USB only no other way
get 31-05-11 image from download centre only 31-05-2011 not other places {it might be possible image has been corrupted by different means
2-Do full factory reset .
3-Fallow wizard and download default channel list {if hard disk or wifi leave it for after ignore at this moment }
4-Turn off from rear for one minute
5-Test all functions use c:lines test all channels motor as many functions as you can
when test completed and you are 100% fully satisfied there is nothing wrong no green screen or freezing
6-Use only external hard disk only
press on USB button to find hard disk and format it
off/on from rear then test all PVR functions working perfect
7-use wifi setting {optional } .
8-If above has problem continues download 31-05-2011 again by USB ..may be image was not downloaded properly,
================
In this image multimedia/streaming is disabled but soon will be another image with this fix
================================================== ===========
This image has been tested by fallowing above instrucations with success and No green screen or hung-up
picture has been perfect in HD and Sd channels :banana::banana::banana:

 

[ellie1998]

I think we have had this information enough now.

I will make it a sticky (for now) any repeats will be deleted as spam and an infraction issued.

 

[ellie1998]

As an update this will no longer make your box work correctly.
You cannot use the downloadable catseyes as it will make the box unstable.
If you use the default channel list with the image then 0.8w sat will no longer work.

I will update when/if these issues are fixed.

If you use rats bouquets and scan 0.8w then this is reported to work fine.