Orange nexus script problems

[pmoore31]

I am using an orange nexus which i have had for a couple of years and keep getting the following error message. This script used to work 100% for me. I have tried a few other script and also get the message at the bottom... Can Anyone help please.

RevB0D 5C01 Rom 11's are not supported yet - sorry

Script C:\Documents and Settings\Phil Moore\Desktop\mrmp1.4 prerelease (unfinished)dev4 .xvb Transmission Completed



________________Setting up WinExplorer_________________

Executing Script: C:\DOCUME~1\PHILMO~1\LOCALS~1\Temp\Rar$DI42.047\rom11 boc script 6300 multiproviders(rtrap) ver1-BETA .xvb
TX Data : A0
TX Data : A1
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 07 1B
RX Data : 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30
TX Data : 14 03 10 15 AB 21 00 08 A0 CA 00 00 02 12 00 06
55 0E 03 87 00
RX Data : 14 08
RX Data : 12 00 08 92 04 27 7D 8B
TX Data : 17 15 B0 21 00 0D A0 CA 00 00 07 21 05 01 03 FF
FF 00 28 4F 0E 03 88 00
RX Data : 17 09
RX Data : 12 60 20 A1 26 5C 01 00 01

Now we will try 16FF delay
TX Data : B0 30
TX Data : 47 15 E0
TX Data : 21 00 3D A0 CA 00 00 37 03 35 5C 01 10 31 05 27
05 0D 0B 0D 38 79 1D 11 C7 66 29 BB C2 07 92 11
03 2B 23 DB F2 BE 84
TX Data : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 05 02
TX Data : 0E 05 8A 00
RX Data : 47 0B
RX Data : 12 00 07 83 03 B1 01 01 90 00 B4
TX Data : 53 15 E8
TX Data : 21 00 45 A0 D7 10 80 40 1F F0 26 40 5B FB 22 5E
A0 90 94 A5 76 73 5D 84 58 F6 A4 9B 6D 8E 67 CE
5C BB C8 FB CD 32 E0
TX Data : AB 5A 96 CA 3F 3A ED 45 C5 58 4F A2 A0 C4 C3 5E
44 0C 94 43 21 8B 04 DB 40 7C
TX Data : A4 8C B0 9A F4 E5 5B 4C 20 16 FF 06 0E 05 85 00
RX Data : 52 00
!
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 07 1B ! ! !
Too many consecutive resetsYou may need to adjust your glitcher and/or script settings
Script will now exit - have a nice day

Script C:\DOCUME~1\PHILMO~1\LOCALS~1\Temp\Rar$DI42.047\rom11 boc script 6300 multiproviders(rtrap) ver1-BETA .xvb Transmission Completed


Thanks in advance

 

[shadow]

Are you trying to open a revBOD card?

 

[pmoore31]

hi yes to get Ird and BK off card, not sure if i need a new flash for my nexus?? Anyone help please

 

[edds]

Need to use B0D unlocker script in conjunction with the My Looper Winex settings. Also newd11x flash files IIRC.

Found the file http://www.digitalworldz.co.uk/forums/showthread.php?t=116164

 

[pmoore31]

Need to use B0D unlocker script in conjunction with the My Looper Winex settings. Also newd11x flash files IIRC.

Found the file http://www.digitalworldz.co.uk/forums/showthread.php?t=116164

Thanks m8. It's been a couple of years since I have done this... I am sure it will all come back... lol

 

[jumpinjo]

you will get the lot here m8 in last post and tut if you need it


http://www.digitalworldz.co.uk/forums/showthread.php?t=117302

 

[pmoore31]

you will get the lot here m8 in last post and tut if you need it


http://www.digitalworldz.co.uk/forums/showthread.php?t=117302

Thanks m8. When i installed winexplorer I can't seem to find The winexplorer directory on my C drive to place the ini file into. Am i missing something here

 

[jumpinjo]

just cut and paste new ini file into wineplorer folder

 

[shadow]

Yeah that would be a problem.

Why dont you do a search on you system for a folder or file name with winexplorer in it.

only other thing to do is reinstall and make a note of the directory.

 

[pmoore31]

Thanks I managed to re-install it, i am sure unlocking used to be easy.. lol

I used to have a script that once i ran it, it spat out the ird and bk within winex.. does such a script now exist?

Also sorry for all the questions but if the script is running and all i get is ! ! ! ! ! ! ! ! . Is this a bad thing??

 

[shadow]

For BOD cards run the "rom 11 unlocker" script after flashing your nexus.

I use swithches 2,5 and 6 and normally the card unlocks in about 2 mins when the script is running there should be a mixture of --- and +++ symbols.

Also make sure you have installed script control and set compatability to win 98.

There is a fair bit of fiddling involved and you will have to read the card in nagra after it has been unlocked to get ird+bk

 

[pmoore31]

For BOD cards run the "rom 11 unlocker" script after flashing your nexus.

I use swithches 2,5 and 6 and normally the card unlocks in about 2 mins when the script is running there should be a mixture of --- and +++ symbols.

Also make sure you have installed script control and set compatability to win 98.

There is a fair bit of fiddling involved and you will have to read the card in nagra after it has been unlocked to get ird+bk

cheers m8. spent 7 hours on it and all i get is 'Unable to Identify Privider, Exiting...' (tried every setting under the sun.. lol. I am going to have to try this on another PC. What really pxsses me off is my old script used to work 100% thanks for the advice so far ...

 

[pmoore31]

Update....

I started from scratch again.. Uninstalled everything. Just Unlocked first card with new script. Thanks again all for your help.. Regards : multi :

 

[edds]

Thanks I managed to re-install it, i am sure unlocking used to be easy.. lol

I used to have a script that once i ran it, it spat out the ird and bk within winex.. does such a script now exist?

Also sorry for all the questions but if the script is running and all i get is ! ! ! ! ! ! ! ! . Is this a bad thing??

Possibly that'd be the funcard (if written with xv2/nce) script or the read atmega xpl file, they both spat out the IRD and BK, IIRC.

 

[shadow]

good on you m8

 

[pmoore31]

good on you m8

becuase the Rom 11 was so successful I am not going to do a search for the best Rom 10 script

 

[pmoore31]

Had A86 rom 10 unlocker running for 2 days now and still not unlocking card...

Whats the longest it's ever taken anyone to unlock one of these??

or do you think the card might be knackered??

As one of my friends rom 11 card read this in Nagra:-

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 5C
CamID: 27 7B B5 A7
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

It's asking for a Specify bckdoor 0 login password.

Do you think it needs unlooping? I have not got a clue what the password could be...

thanks in advance

 

[edds]

The card isn't knackered, cos there's only two outcomes. 1. The card unlocks or 2. The script just stops, hangs or whatever you'd call it, on an RST.

It depends on the unlocker how long it'd take, v3 ubomb minutes, t911 dunno and nexus almost never.

 

[pmoore31]

The card isn't knackered, cos there's only two outcomes. 1. The card unlocks or 2. The script just stops, hangs or whatever you'd call it, on an RST.

It depends on the unlocker how long it'd take, v3 ubomb minutes, t911 dunno and nexus almost never.

thanks edds.. its a orange nexus.. so your saying it could take weeks.. lol

 

[edds]

When the a86 first appeared, there were test scripts out, ISTR we were asked to load a certain image at a16 with bugcatchers at zero and then at 20 or similar; put it in stream and it'd update to a86, then try the script.
Basically we were attempting to unlock this image twice, but with bugs set differently. I hope this makes sense?
I ran it on my orange nexus and it unlocked it, but this was a one off. Reports were coming in, later, of some success with a ubomb and since then also T911s, too. But tbh, I'd say unlocking with an orange nexus on an a86 are slim to none, unless a pot mod is done and don't ask me what's required cos I don't know, lol.