moonster72
Inactive User
- Joined
- May 27, 2005
- Messages
- 22
- Reaction score
- 0
Hello all
Before i start, none of this info is mine. It is what i have got from this site and id like to give a little back.
Theres a lot of talk about ditching your Tit 2 and doing a funcard until a proper fix is found, this method has got my card working again.
After a lot of searching heres what i found:
Get hold of the two public keys i found this Tutorial Helpful
www.world-of-digital.com/forums/attachment.php?attachmentid=8235&d=1113295333
i used the above to get the keys. Open the RST Hex in wordpad and read the magic numbers.
Use WinExp and do a save EEP to save your card image.
Use Nagraedit to put your keys into public keys and save the image. (see attachment for where if your not sure).
Use Winexp and do a Load EEP to put your previously save image back to your card.
Put card back in box and power up.
This worked for me so hopefully itll get you up and running until some cleverer than me people get a better fix.
Regards
Moonster:BLOBBY:
Before i start, none of this info is mine. It is what i have got from this site and id like to give a little back.
Theres a lot of talk about ditching your Tit 2 and doing a funcard until a proper fix is found, this method has got my card working again.
After a lot of searching heres what i found:
Get hold of the two public keys i found this Tutorial Helpful
www.world-of-digital.com/forums/attachment.php?attachmentid=8235&d=1113295333
i used the above to get the keys. Open the RST Hex in wordpad and read the magic numbers.
Use WinExp and do a save EEP to save your card image.
Use Nagraedit to put your keys into public keys and save the image. (see attachment for where if your not sure).
Use Winexp and do a Load EEP to put your previously save image back to your card.
Put card back in box and power up.
This worked for me so hopefully itll get you up and running until some cleverer than me people get a better fix.
Regards
Moonster:BLOBBY:
