Hi I am a newbie with dreamboxes and have successfully set up the 7025+ to receive freetoair
following the various guides and tips in various forms I have come across the following problem
using dcc I am able to format a kingston and scandisk usb pen but when trying to mount get the following
mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/mnt/usb failed: no such file or directiory
the original flash image is oozoon
any solution would be appreciated
I have also tryied to backup the original image with dcc but the button is greyed out also tryied SIadmin post dated 10 05 2003 but get a similar responce file not found
would like to move on from just freetoair
thanks for the quick reply when telnet box opens it says connecting to ip... then the box disappears
please advise me where i am going wrong
yes its the same one as in the dcc setup
sorry sorted the telnet access out
entered unmount/usb saya not found
entered next line says not found
does not want to recognise the usb but will format
tried umount/usb not found
entered second line not found
entered third line goes back to root cursor
any suggestions
cheers for your help so far
first line reply no such file or directory
second line ok
third line failed no such file or directory
have run dmseg
how do I copy to post? please
usb 1-1: new full speed USB device using ohci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Vendor: SanDisk Model: U3 Titanium Rev: 2.18
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 2006673 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2006673 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: unknown partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
root@dm7025:~# [/quote]
ok sorted how to copy post
hope this will show the problem at last
tried your suggestion
1st line invalid argument
2nd line ok
3rd line invalid argumnet
the usb drive is 1GB
thanks for your efforts so far
look forward to other suggestions
found media/usb/usr/lib/ipkg/info
media/hdd
media/cf/user/lib/ipkg/info
I do not understand what you mean by actual output and error?
the responses I have written were the ones shown after the entry of each line that you asked me to type in
following the various guides and tips in various forms I have come across the following problem
using dcc I am able to format a kingston and scandisk usb pen but when trying to mount get the following
mounting /dev/scsi/host0/bus0/target0/lun0/disc on /var/mnt/usb failed: no such file or directiory
the original flash image is oozoon
any solution would be appreciated
I have also tryied to backup the original image with dcc but the button is greyed out also tryied SIadmin post dated 10 05 2003 but get a similar responce file not found
would like to move on from just freetoair
thanks for the quick reply when telnet box opens it says connecting to ip... then the box disappears
please advise me where i am going wrong
yes its the same one as in the dcc setup
sorry sorted the telnet access out
entered unmount/usb saya not found
entered next line says not found
does not want to recognise the usb but will format
tried umount/usb not found
entered second line not found
entered third line goes back to root cursor
any suggestions
cheers for your help so far
first line reply no such file or directory
second line ok
third line failed no such file or directory
have run dmseg
how do I copy to post? please
usb 1-1: new full speed USB device using ohci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Vendor: SanDisk Model: U3 Titanium Rev: 2.18
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 2006673 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2006673 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: unknown partition table
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
root@dm7025:~# [/quote]
ok sorted how to copy post
hope this will show the problem at last
tried your suggestion
1st line invalid argument
2nd line ok
3rd line invalid argumnet
the usb drive is 1GB
thanks for your efforts so far
look forward to other suggestions
found media/usb/usr/lib/ipkg/info
media/hdd
media/cf/user/lib/ipkg/info
I do not understand what you mean by actual output and error?
the responses I have written were the ones shown after the entry of each line that you asked me to type in
Last edited by a moderator: