Hi All
Am helping another member here & have his upc n3 card working in the dreambox using rqcs:
So going by that its reading the card ok, Now i have tried a couple of emu's but not having much luck the best has been mgcamd:
Am helping another member here & have his upc n3 card working in the dreambox using rqcs:
Opening sci... Done
Detecting card... Card present
root@dm500 ~ # Resetting card... Done
Identifying card type...
Historical bytes: D N A S P 1 4 2 R e v G 0 2
44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32
Card type: Nagra
ROM Revision: 142
EEPROM Revision: RevG02
Configuring sci...
SCI | f: 3574595 | T: 1 | ETU: 32 | EGT: 1 | CWT: 25 | BWT: 89291 | WWT: 0
Slot custom parameters:
des_key: 0102030405060708091011121314
box_key: ################
dt06_key_0d:
cam_n: ######################## ...
Long parameter, first 32 characters shown, 128 total.
secondary_key:
rsa_key:
Card start-up initialization...
Using Plain CAM N session negotiation method:
Setting Field Size: Done
Retrieving IRD serial number: ########
Retrieving CAM serial number: ########
Retrieving System IDs: 5F01,5F02
Retrieving CAM challenge data: Done
Performing Session Key Negotiation: Successful
Starting card worker thread... Done
Starting protocol server on port 10000 [newcamd protocol]
Logical Slot 'Lower' READY!
------------------------------------------------------------------------------
Starting Logical Slot 'Upper' [Users: 1]
------------------------------------------------------------------------------
Device Path: /dev/sci1 | Listening Port: 10000
------------------------------------------------------------------------------
So going by that its reading the card ok, Now i have tried a couple of emu's but not having much luck the best has been mgcamd:
anyone see something i've missed???[mg0] stoping camd..
/dev/dvb/card0/ca0 error 16: Device or resource busy
/dev/dvb/card0/ca0 error 16: Device or resource busy
got 52 cmd 9F
[mg0] namespace FFFF0000 t-id 38 on-id 601
[mg0] descramble on 1, source 0
[mg0] service 25A index 0 pmt pid 21 (19)
ECM: CaID: 0x1802 -> CaPID: 0x0692 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0692 failed to decode.
[mgcamd] emm started
*EMM: CaID: 0x1800 -> CaPID: 0x0080 ProvID: 000000
*EMM: CaID: 0x1801 -> CaPID: 0x0081 ProvID: 000000
*EMM: CaID: 0x1802 -> CaPID: 0x0082 ProvID: 000000
DISCONNECT **** [Wed Jan 20 00:13:40 2010] Client disconnected...
User: 'dummy' | Current clients: 0
[newcamd] 127.0.0.1:10000: problem, will try to reconnect
[newcamd] Connecting to 127.0.0.1:10000...
[newcamd] Login to 127.0.0.1:10000 as dummy accepted (31ms)
CONNECT **** [Wed Jan 20 00:13:42 2010] Processing incoming connection...
User 'dummy' authenticated [Client: unknown] | Clients: 1
[newcamd] Card data from 127.0.0.1:10000 (34ms):
Userid 0 caid 1802 providers 2
Idents: 005F01 005F02
DATA **** [Wed Jan 20 00:13:42 2010] Processing card data request...
Username: dummy | Logical slot: 'Lower' | Card data sent successfully.
DISCONNECT **** [Wed Jan 20 00:14:13 2010] Client disconnected...
User: 'dummy' | Current clients: 0
[newcamd] 127.0.0.1:10000: problem, will try to reconnect
[newcamd] Connecting to 127.0.0.1:10000...
[newcamd] Login to 127.0.0.1:10000 as dummy accepted (31ms)
CONNECT **** [Wed Jan 20 00:14:15 2010] Processing incoming connection...
User 'dummy' authenticated [Client: unknown] | Clients: 1
[newcamd] Card data from 127.0.0.1:10000 (34ms):
Userid 0 caid 1802 providers 2
Idents: 005F01 005F02
DATA **** [Wed Jan 20 00:14:15 2010] Processing card data request...
Username: dummy | Logical slot: 'Lower' | Card data sent successfully.