systemready
Inactive User
Hello,
I wonder if someone can help me getting my head around the setup of a Tm-5402HD. I have two dishes installed on my roof, one for Astra 28.2E and one for Eurobird 13E. My receiver was previously setup for a motorised antenna, so I cleaned up the configuration to factory reset but I now can't get the hold of how to correctly configure it.
First of all, the two dishes have two separate leads. The two leads enter the house and connect to a Diseqc device with three connector, LNB1, LNB2, and the third connector (middle one) that connects to the receiver.
On the receiver, despite factory resetting the configuration I still have some satellites. What I would like to do is to scan both LNBs and get the full set of channels from both sources.
So far I took one of the satellites and configured manually Diseqc 1.0 setting it to 1 of 4; the LNB Frequency is set to 9.750 / 10.600; LNB Type is Universal and Diseqc 1.1 is set OFF.
I then exited the page and went to Blind Search. After a long scan,I ended up with 1049 channels. When I exit the configuration menu and press SAT, I can see the satellite I just configured in the list, and nothing else. The list of channels available appears to be from the 13E satellite/dish.
I then tried to repeat the process by choosing another satellite, hoping to get all the 28.2E channels. I selected another satellite from Satellite Setup, chose Diseqc 2, repeated the Blind Scan but have no channels and when I get back to the TV screen and press SAT I cannot see the additional satellite.
My simple questions are if the process described above is correct and, if not, can someone lead me through the correct procedure? All this of course is under the assumption that the TM5402HD doesn't necessarily need a motorised antenna to work - I hope I am correct!
Thanks for your help.
Raul
I wonder if someone can help me getting my head around the setup of a Tm-5402HD. I have two dishes installed on my roof, one for Astra 28.2E and one for Eurobird 13E. My receiver was previously setup for a motorised antenna, so I cleaned up the configuration to factory reset but I now can't get the hold of how to correctly configure it.
First of all, the two dishes have two separate leads. The two leads enter the house and connect to a Diseqc device with three connector, LNB1, LNB2, and the third connector (middle one) that connects to the receiver.
On the receiver, despite factory resetting the configuration I still have some satellites. What I would like to do is to scan both LNBs and get the full set of channels from both sources.
So far I took one of the satellites and configured manually Diseqc 1.0 setting it to 1 of 4; the LNB Frequency is set to 9.750 / 10.600; LNB Type is Universal and Diseqc 1.1 is set OFF.
I then exited the page and went to Blind Search. After a long scan,I ended up with 1049 channels. When I exit the configuration menu and press SAT, I can see the satellite I just configured in the list, and nothing else. The list of channels available appears to be from the 13E satellite/dish.
I then tried to repeat the process by choosing another satellite, hoping to get all the 28.2E channels. I selected another satellite from Satellite Setup, chose Diseqc 2, repeated the Blind Scan but have no channels and when I get back to the TV screen and press SAT I cannot see the additional satellite.
My simple questions are if the process described above is correct and, if not, can someone lead me through the correct procedure? All this of course is under the assumption that the TM5402HD doesn't necessarily need a motorised antenna to work - I hope I am correct!
Thanks for your help.
Raul