- Joined
- May 13, 2013
- Messages
- 2,136
- Reaction score
- 436
beginers guide to setting up a sundtek usb cable tuner on the vu+ solo2 (outhers recevers are available)
first pick your image (latest vix/atv for autobouquet makes life easy).
once set up you will need to add a cables xml file to the ect folder in the vu+ using an ftp program.(dcc/filezilla).
now add your cable feed to the sundtek usb tuner, and the usb end to the receiver.
on the receiver go to plugins and install the sundtek control center plugin, restart enigma.
in sundtek cc you want to set it to,
hide
yes
no
off
off
off
no
DVB-C
via USB
no
pree channel up button on remote to install drivers, then press green/setup, then blue/start tuner, it should restart receiver
press menu. set up. service searching, tuner config, you should see the usb tuner at the bottom, (if not go back and start tuner in sundtek cc again) set as follows,
DVB-C
enabled
your net id *****
provider
v****n media
then green/save, thats your tuner set for cable.
go back and into auto bouquets maker, providers, scroll down to v(uk) set to yes and set up how you want your bouquets remember and set the area to were you are, and green/ok. start scan you should find over 300 services. if you have both sat and cable running at the same time on same receiver you will want the both sets of bouquets, do that with abm in configure,
expert
no
yes
yes
top
no
green/ok, go back into providers and scroll down to sly and set it how you want it, green/ok start scan
if you need to scan for new channels scan as you would normaly,service searching, auto, blind, manual scan
hope this helps
first pick your image (latest vix/atv for autobouquet makes life easy).
once set up you will need to add a cables xml file to the ect folder in the vu+ using an ftp program.(dcc/filezilla).
now add your cable feed to the sundtek usb tuner, and the usb end to the receiver.
on the receiver go to plugins and install the sundtek control center plugin, restart enigma.
in sundtek cc you want to set it to,
hide
yes
no
off
off
off
no
DVB-C
via USB
no
pree channel up button on remote to install drivers, then press green/setup, then blue/start tuner, it should restart receiver
press menu. set up. service searching, tuner config, you should see the usb tuner at the bottom, (if not go back and start tuner in sundtek cc again) set as follows,
DVB-C
enabled
your net id *****
provider
v****n media
then green/save, thats your tuner set for cable.
go back and into auto bouquets maker, providers, scroll down to v(uk) set to yes and set up how you want your bouquets remember and set the area to were you are, and green/ok. start scan you should find over 300 services. if you have both sat and cable running at the same time on same receiver you will want the both sets of bouquets, do that with abm in configure,
expert
no
yes
yes
top
no
green/ok, go back into providers and scroll down to sly and set it how you want it, green/ok start scan
if you need to scan for new channels scan as you would normaly,service searching, auto, blind, manual scan
hope this helps