it could and most likely nothing is showing m8
but here it is
MENU
SETUP
SYSTEM SETTINGS
OSD SETTINGS
TUXTEXT POSITION (YELLOW)
Position the two right angles at the top left and bottom right corners of your tv. Doesn't need to be perfect, probably better if you bring them in a bit and not exactly on the edge.
OK when done
Green to save or highlight Save and press OK
Exit out the menus and return to Tuxbox Commander.
Now...follow these instruction. It will take a while but should work.
You need to use the remote to do everything. When you're adding characters it will be like texting on your mobile phone. Press '7' 4 times to get an 'S', etc etc.
Scroll down to var and press ok
Scroll down to tuxbox and press ok
Scroll down to config and press ok
Scroll down to enigma and press ok
Scroll down to cable and press ok
You should have a list of userbouquet files with numbers and letters after them. You need to find the Sports bouquet. On my box, it was called userbouquet.d7d3e4.tv. Highlight the file and press '4' to edit. You can see at the bottom of the screen it tells you what each button on the remote does.
At the top of the file it will say what each bouquet is called.
For example, my Sports bouquet is called 'Sport' so at the top of my file it says...
#NAME Sport
Ok so far? Good.
So you've found the sports bouquet and you see a load of lines that start...
#SERVICE: 1:0:1: bla bla bla
These are the individual channels in your sports bouquet.
Highlight the line directly under the #NAME Sport line and press
GREEN twice. This should create two empty lines at the top of your page.
Highlight the first empty line and press OK.
The bottom of the screen should change to show you what each key on the remote does. Use these buttons to enter the following text
Note there's a space after #SERVICE:
The 6a4 is the service id for the channel
The 7 is the transponder id
These numbers are for ex-tw only.
For ex-N t l is might be this but I'm not sure because I can't test it.
you should have used the buttons on the remote to enter that text
If you want the '#' press 0
If you want the ':' press 1 until it comes up. Watch out for the ';' before it.
If you want capital letters for the SERVICE, press 'yellow'
Now highlight the second blank line that you created and press ok.
Put the following text in...
So now you should have the following at the top of your userbouquet file
Press EXIT on the remote then
RED to save.
Press EXIT on the remote then
RED to save.
Select the Reload Channels option.
Check your Sports bouquet and it should be at the top.
If you want to move it elsewhere in the list, use Service Organising from the Setup menu.