please help ,dcc not showing files

[freeman01]

Please help

I use dcc 296 E1 on a technomate 9100 super ,telnet and ftp are connected but

when I click on the ftp button ,I see nothing , no files.

I have edg nemesis image ,tried also with the ds image ,still same problem.

login :root the pswd:leaved blank ,realy dont know why I cant see the files.

With my dm7020 no problems ,I tought maybe the firewall but no.

Thanks in advance for Ur help

 

[jango]

I had this problem as well if you use telnet and change the password from blank to say technomate or whatever then exit.
Go back into dcc enter your new password then you will see the files then on the left hand side.

 

[forest1]

Hi Guy's whats the best image to use?and why?

Thanks Rob

 

[freeman01]

I had this problem as well if you use telnet and change the password from blank to say technomate or whatever then exit.
Go back into dcc enter your new password then you will see the files then on the left hand side.

Thanks M8 ,did like you said and all works fine ,the files are visible now.

Tnx again

 

[digidude]

Hi Guy's whats the best image to use?and why?

Thanks Rob

for the 9100 either UR14 or UR18 m8