chrome307
Inactive User
Technomate tips by Neovo
********************************************************************************
First up forgot your password or changed it from default one which is "0000" press and hold power button and channel up on the front of your TM1X00. This brings up a diagnostic menu screen go down to PASSWORD and press OK.
this will reveal your password power off to exit.
*********************************************************************************
****WARNING**** MUST BACKUP YOUR CHANNEL LIST WITH THE TMLOADER FIRST
THEN YOU WILL NOT HAVE TO SETUP YOUR CHANNELS AND MOTOR SETTINGS UP AGAIN.
Better factory reset option goto CLEAR NVRAM in diagnostic menu press OK.
I found this to be better then the factory reset in the tm menu.it helps with the old 16/9 - 4/3 screen problem as well as speed up things and other hicups.
now just re-loading your channel list and new key file.
*********************************************************************************
Hidden BISS Menu hitting 8280 on remote brings up a BISS CAS screen when in normal tv mode just as if your changing the channel.
**********************************************************************************
Setting up a new channel list with ndf edit.if you have a Diseqc 1.2 motor and dont want to setup it up every time you change your channel list to one you got off the internet.
You must first backup your old channel list you will need to find Diseqc positioner id's.
Open 2x TMEditor one with your old channel list and one with your new channel list.
When you click on a satellite in the list on the left of the TMEditor.
You will see on the right a menu with network at the top.now if you look you will see Diseqc positioner ID this is the information you need to change on the new channel list.
Just copy from your old channel list the Diseqc positioner ID to the new channel list of each satellite you have stored in you stb. and your motor will work just as it did on the old channel list. Not to forget to select Diseqc positioner level 1.2 when doing so.
************************************************************************************
To change keys on the fly just press mute & exit and key edit will pop up.
You must be on the channel you want to change the keys on.just press down on the remote to move to the key you want to change ie.00/01.now press OK and edit the key then press EXIT until it says 'settings were changed do you want to save' press YES to save changed key.
*************************************************************************************
To change ECM pid's press mute & exit and key edit menu will pop up now press blue button on the remote new menu will pop up.use the ECM that match your provider keys or leave it on auto.
*************************************************************************************
To switch on and off the CAS menu in system information press 2004 on the remote.
********************************************************************************
First up forgot your password or changed it from default one which is "0000" press and hold power button and channel up on the front of your TM1X00. This brings up a diagnostic menu screen go down to PASSWORD and press OK.
this will reveal your password power off to exit.
*********************************************************************************
****WARNING**** MUST BACKUP YOUR CHANNEL LIST WITH THE TMLOADER FIRST
THEN YOU WILL NOT HAVE TO SETUP YOUR CHANNELS AND MOTOR SETTINGS UP AGAIN.
Better factory reset option goto CLEAR NVRAM in diagnostic menu press OK.
I found this to be better then the factory reset in the tm menu.it helps with the old 16/9 - 4/3 screen problem as well as speed up things and other hicups.
now just re-loading your channel list and new key file.
*********************************************************************************
Hidden BISS Menu hitting 8280 on remote brings up a BISS CAS screen when in normal tv mode just as if your changing the channel.
**********************************************************************************
Setting up a new channel list with ndf edit.if you have a Diseqc 1.2 motor and dont want to setup it up every time you change your channel list to one you got off the internet.
You must first backup your old channel list you will need to find Diseqc positioner id's.
Open 2x TMEditor one with your old channel list and one with your new channel list.
When you click on a satellite in the list on the left of the TMEditor.
You will see on the right a menu with network at the top.now if you look you will see Diseqc positioner ID this is the information you need to change on the new channel list.
Just copy from your old channel list the Diseqc positioner ID to the new channel list of each satellite you have stored in you stb. and your motor will work just as it did on the old channel list. Not to forget to select Diseqc positioner level 1.2 when doing so.
************************************************************************************
To change keys on the fly just press mute & exit and key edit will pop up.
You must be on the channel you want to change the keys on.just press down on the remote to move to the key you want to change ie.00/01.now press OK and edit the key then press EXIT until it says 'settings were changed do you want to save' press YES to save changed key.
*************************************************************************************
To change ECM pid's press mute & exit and key edit menu will pop up now press blue button on the remote new menu will pop up.use the ECM that match your provider keys or leave it on auto.
*************************************************************************************
To switch on and off the CAS menu in system information press 2004 on the remote.
