I just moved to an apartment with a Lutron HomeWorks QS system (from SEP 2016)- and it is working fine.
Unfortunately the installed Lutron Connect Bridge could not be updated and Lutron replaced it for free (nice ).
I turns out that it is not possible to just replace the old bridge with the new one (very bad!! ))
The new bridge need to be added to the system via HomeWorks design software (mentioned in the documentation).
Apparently you can't do that yourself ... which is really annoying ....
I managed get hold of HomeWorks QS Design Software v. 3.0.0 and in "terminal" in the program I could get the below information about the system
Wednesday, January 20 2021 at 23:31:58 - QNET: 2021-01-20 23:32:25: (TX) FIRMWAREREV
Wednesday, January 20 2021 at 23:32:17 - OS Firmware Revision = 10.4.0 [Sep 07 2016 17:49:27]
Wednesday, January 20 2021 at 23:32:17 - Database Design Rev = 300033
Wednesday, January 20 2021 at 23:32:17 - BOOT Firmware Revision = 2.2.0
I could only get information and change IP address ect. - but I could not download the database.
Can I use "BETA Lutron HomeWorks QS Lighting Software" v.10.70 - if not what do I need?
If yes - do I need to download the database - then add the new bridge - and the upload the revised database -
or how do I do it?
Best regards
Carsten
Unfortunately the installed Lutron Connect Bridge could not be updated and Lutron replaced it for free (nice ).
I turns out that it is not possible to just replace the old bridge with the new one (very bad!! ))
The new bridge need to be added to the system via HomeWorks design software (mentioned in the documentation).
Apparently you can't do that yourself ... which is really annoying ....
I managed get hold of HomeWorks QS Design Software v. 3.0.0 and in "terminal" in the program I could get the below information about the system
Wednesday, January 20 2021 at 23:31:58 - QNET: 2021-01-20 23:32:25: (TX) FIRMWAREREV
Wednesday, January 20 2021 at 23:32:17 - OS Firmware Revision = 10.4.0 [Sep 07 2016 17:49:27]
Wednesday, January 20 2021 at 23:32:17 - Database Design Rev = 300033
Wednesday, January 20 2021 at 23:32:17 - BOOT Firmware Revision = 2.2.0
I could only get information and change IP address ect. - but I could not download the database.
Can I use "BETA Lutron HomeWorks QS Lighting Software" v.10.70 - if not what do I need?
If yes - do I need to download the database - then add the new bridge - and the upload the revised database -
or how do I do it?
Best regards
Carsten