How to get OSCAM working on DM600 with PLI Jade 3 - Enigma 1
I cant see a proper consolidated tutorial for the above so I thought I would put it all in one.
THIS IS NOT MY WORK, ALL THE INFO HAS BEEN GATHERED FROM OTHER USERS.
Thanks goes to:
Wiz569
Beechtree
dar1437
js
All of DW sat contributers
Anyone I have not mentioned
Google
Anyway, heres the scenarion, you have a DM600PVR sat running cccam 2.3.0 (server). Something has changed and you need to migrate your cardserver over to oscam but leaving all your cccam users lines in tact.
Go to:
Download that file that was posted by dar1437. Unzip and save it somewhere on your computer. Should be a file called oscam.
If you are on windows 7 like me, just open a folder and type the following in the address bar:
ftp://dm600.ip.address/var/tuxbox/config/
Paste the oscam file into here.
Right click on the pasted file and click on properties.
Set the permissions by ticking all 9 boxes.
Ok and come out of the box.
go to the following thread and install telnet on yuor windows 7 if you have not got this running:
https://www.digitalworldz.co.uk/index.php?threads/293131/#post2156808
once done, go into cmd in your computer and type the following:
telnet dm600.ip.address
press enter
it will ask for a user and password. enter this in, you should know this.
press enter
then type the following:
touch /var/etc/plimgr/cardservers/oscam
press enter.
you can come out of telnet now. (just type exit and press enter)
just to check that this has worked, in your dreambox go to /var/etc/plimgr/cardserver
there should be a file called oscam in there.
if there isnt, just right click and click on refresh, you should see it now.
now, on your computer create 3 files and name them the following (make sure to enable to see file extensions in folder options).
oscam.conf
oscam.server
oscam.user
you need to manually paste the information into these files as they will be blank.
oscam.conf should look like this:
oscam.server should look like this.
oscam.user should look like this
Once done, save the above files and paste it into
ftp://dm600.ip.address/var/tuxbox/config/
then reboot your box.
go into menu > setup > softcam setup > cardserver and select oscam.
restart cardserver, save and restart cam.
should be good to go.
to check whether oscam is running, open up telnet as explained above and type ps.
oscam should be displayed in the list of running processes.
The end!
I am no way an expert on this and this is how i got mine working, please feel free to correct the above and add suggestions to make the running of this better.