here are some error codes hope this is in the right place if not sorry

[mapman]

--------------------------------------------------------------------------------
Here are some known error codes/meanings for ntl boxes:
Err1_ CRC fail across Primary Loader image.
Err2_ No longer used.
Err3_ Insufficient NVRAM
Err4_ Flash Fail or can't find platform object
Err5_ NVRAM not found
Tuning Sequence Related Errors
Er10_ Unable to Tune to Last frequency
Er11_ Unable to Tune to Home Frequency
Er12_ Unable to Tune to any of the last NIT defined frequencies
Er13_ Unable to scan for a frequency
Er14_ Unable to scan for a symbol rate
Er16_ Unable to tune to hardcoded frequency
Input Stream Errors
Er20_ Timeout on receiving NIT
Er21_ Timeout on receiving PAT
Er22_ Timeout on receiving PMT
Er23_ Timeout on receiving object data
Er24_ Timeout on receiving TDT
Er25_ Sync loss has occurred on the input stream
Object Validation
Er30_ Object CRC Fail
Er31_ Object Digital Signature Fail
Flash programming errors.
Er40_ Insufficient Flash ( NAND Flash Specific )
ErrC_ Failed to Erase Flash Sector
ErrD_ Failed to Program a Flash sector.
ErrE_ CRC Failure of image just programmed into Flash
can mods sticky this pls

this is not my own work if it helps cool

 

[dabest57]

thankx mate, Just to vertify that these error codes are for pace boxes

Dabest57

 

[mapman]

thankx mate, Just to vertify that these error codes are for pace boxes

Dabest57

yes m8 have found the same probs with error codes .and for sammies to
this work is not my own work