willin
DW Regular
- Joined
- Sep 17, 2007
- Messages
- 729
- Reaction score
- 369
Lads, my Dyson DC25 has a fault and wonder if I am on the right track with the fix. Vacuuming a mat and the machine brush stopped, nothing unusual about that, it was designed to do it, so I press the brush reset button (grey) next to the on/off switch (red). Nothing happens, after 2 or 3 minutes of trying different things I go through 1, remove the brush, clean and refit. 2 remove the plate at the side of the ball where the upright switch is, check the wiring and switch is ok. 3 remove the cover and check the on/off and reset switches are fine.
When I try it now the brush will work at a certain angle from vertical but only for a very particular angle and goes off either side of that, if that makes sense. The switch is easily replaced and only ยฃ5
https://dysonvacuumspares.co.uk/index.php?route=product/product&path=125&product_id=136
Am I on the right track or could it be the mechanism that engages the switch or something else?
TIA.
When I try it now the brush will work at a certain angle from vertical but only for a very particular angle and goes off either side of that, if that makes sense. The switch is easily replaced and only ยฃ5
https://dysonvacuumspares.co.uk/index.php?route=product/product&path=125&product_id=136
Am I on the right track or could it be the mechanism that engages the switch or something else?
TIA.