Hi Guys,
I have installed a couple of outside taps for a friend in the past and they have enlisted me to help them again. They have a caravan and would like an outside tap for a pressure washer. All the fittings are speed fit and MDPE pipe (i think). I have never dealt with this before and was wondering the best way of fitting and outside tape.
I am a little unsure of the sizes I am dealing with and was wondering what the best practice (and cheapest) was the way forward? I think 25mm is the smaller of the 2 pipes in the picture.
I thought there may be a t piece that had a tap and 1/2" fixing on , that was wishful thinking though.
I have looked and thought I may be best getting these:
Clamp Saddle Pipe Saddle Polypropylene (PP) Single BSP Outlet 25mm To 63mm MDPE | eBay
Hose Union Bib Tap 1/2" | Toolstation
or;
MDPE Equal Tee 25mm | Toolstation
MDPE Female Elbow 25mm x 1/2" | Toolstation
Hose Union Bib Tap 1/2" | Toolstation
Thanks in advance for your advice.
I have installed a couple of outside taps for a friend in the past and they have enlisted me to help them again. They have a caravan and would like an outside tap for a pressure washer. All the fittings are speed fit and MDPE pipe (i think). I have never dealt with this before and was wondering the best way of fitting and outside tape.
I am a little unsure of the sizes I am dealing with and was wondering what the best practice (and cheapest) was the way forward? I think 25mm is the smaller of the 2 pipes in the picture.
I thought there may be a t piece that had a tap and 1/2" fixing on , that was wishful thinking though.
I have looked and thought I may be best getting these:
Clamp Saddle Pipe Saddle Polypropylene (PP) Single BSP Outlet 25mm To 63mm MDPE | eBay
Hose Union Bib Tap 1/2" | Toolstation
or;
MDPE Equal Tee 25mm | Toolstation
MDPE Female Elbow 25mm x 1/2" | Toolstation
Hose Union Bib Tap 1/2" | Toolstation
Thanks in advance for your advice.