mate brought a box round earlier , not a subbed one , anyway cut the t/b in it , put the led sim in and got the bk , got the ird from off the scart and also checked it matched in the em which it did
so i made a fun up using a image i always use for au fun and used the chaos flash , progged the way i normally do
put card in box and the usual message come up please wait while some settings are updated , blah blah
left it for a while went through the channels , all fta channels are fine , but gettin no other channels , so took box back off and double checked the bk just to be on the safe side and was ok
went back into em and checked the freq for area , that was wrong so set it to the freq for my area , booted box up again and was stuck on tune . so i unplugged and held down the up down buttons waited till boot came up on display and let it boot that way and it came on , so left it for a while still the same just fta channels
are the au cards taking forever and a day to update , or is there more of a problem
checked in the em and the ip addy and other bits are there , but wen check by pressing the settings button on remote and goin into tech details , it says no ip and card stat says waiting
by the way the box has taken the vm update
any ideas guys
thx in advance
so i made a fun up using a image i always use for au fun and used the chaos flash , progged the way i normally do
put card in box and the usual message come up please wait while some settings are updated , blah blah
left it for a while went through the channels , all fta channels are fine , but gettin no other channels , so took box back off and double checked the bk just to be on the safe side and was ok
went back into em and checked the freq for area , that was wrong so set it to the freq for my area , booted box up again and was stuck on tune . so i unplugged and held down the up down buttons waited till boot came up on display and let it boot that way and it came on , so left it for a while still the same just fta channels
are the au cards taking forever and a day to update , or is there more of a problem
checked in the em and the ip addy and other bits are there , but wen check by pressing the settings button on remote and goin into tech details , it says no ip and card stat says waiting
by the way the box has taken the vm update
any ideas guys
thx in advance