[DOWNLOAD] Zgemma Tuner Driver Fix

[Ferret]

Downloads: A new file has been added by Ferret:

For use on images from the 31/11/15

To correct the no signal issues on 28east

>>> CLICK HERE TO DOWNLOAD Zgemma Tuner Driver Fix <<<

 

[parkstuart]

where do files go , i.e what folder please?

 

[bobby123]

lib/modules/4.0.1/extra

 

[parkstuart]

lib/modules/4.0.1/extra

thanks Bobby

 

[parkstuart]

is this fix needed for all images after 30/10/15

openATV and openvix?

thanks

 

[bobby123]

don't no mate I only have the h1

 

[Ferret]

is this fix needed for all images after 30/10/15

openATV and openvix?

thanks

Only if your image is having signal problems on 28e

Most of the open images now include the fix.

 

[oneman]

Only if your image is having signal problems on 28e

Most of the open images now include the fix.

I thought that issue was with one of the tuner settings ?

 

[Ferret]

I thought that issue was with one of the tuner settings ?

It is a switching command error im told.

 

[1511ad]

....been having this issue intermittently with my zegemma H1, flashed and re-flashed :handballk for a few days and then suddenly comes up with a tuner error....it ok @ the minute but will give this a go...thanks for sharing:Cheers:

 

[Ferret]

....been having this issue intermittently with my zegemma H1, flashed and re-flashed :handballk for a few days and then suddenly comes up with a tuner error....it ok @ the minute but will give this a go...thanks for sharing:Cheers:

This is for the sat boxes only.

 

[1511ad]

This is for the sat boxes only.

Hi Ferret, kindly throw some more light on this, the intermittent signal error I get is on the sat side of things, saw your original post and was of the impression that the current tuner driver needs to be updated?, assumed that the combo boxes and the single tuner ones have the same tuner hardware on the sat side? I suppose this is not the case?

 

[digi247]

As Ferret stated above the Tuner Driver issue is mainly for the Zgemma 2S which is a Twin satellite tuner and only that model is affected the H1 and H2 are only Single satellite tuner models with a DVB-C on the H1 and a DVB-C/T/T2 on the H2 those models and the single tuner S model are unaffecred

 

[louis cypher]

apparently, changing tuner a to disecq fixes the issue, too

 

[calisto]

apparently, changing tuner a to disecq fixes the issue, too

This worked for me, thanks

 

[Connerzy23]

hi lads been trying to set up my zgemma h2 box but cannot get any signal.

please help im going nuts!!

 

[Heppieboeddah]

What is you're setup..? 1 LBN or more?

 

[jimmyjahooha]

Thanks for this been experiencing this problem on my H1, tried newer images but still no signal for lnb. Any feedback much appreciated.

 

[Ferret]

Thanks for this been experiencing this problem on my H1, tried newer images but still no signal for lnb. Any feedback much appreciated.

This is no longer needed on the later images. Try box on another dish if possible if not try another lnb on your dish check the f connectors etc.

 

[jimmyjahooha]

Thanks for feedback. I connected my blade 7000 to the same connections and all working perfectly. Tearing my hair out as want a complete set up with Tuners A and B working. Been trhough a few images last night but scanning no channels on the sly end.