Front panel boot but working

dexyweescot

Inactive User
Joined
Jun 18, 2007
Messages
1,088
Reaction score
212
Location
Scottish Meat
Strange one. Today it seems the bootloader has got corrupt on H2s somehow flashing and installing etc. I have read many posts about stuck on boot but this box works fine. It's just showing boot on front panel. After hunting down a bootloader and can't find one specific for h3 i gave up and just left it. Anyone else come across this with a fix or even a proper bootloader. I can only find one for the h1



Sent from my HUAWEI VNS-L31 using Tapatalk
 
Strange one. Today it seems the bootloader has got corrupt on H2s somehow flashing and installing etc. I have read many posts about stuck on boot but this box works fine. It's just showing boot on front panel. After hunting down a bootloader and can't find one specific for h3 i gave up and just left it. Anyone else come across this with a fix or even a proper bootloader. I can only find one for the h1



Sent from my HUAWEI VNS-L31 using Tapatalk

reflash box
 
Have you used small size USB to flash?
Best is Kingston 1GB or 2GB.
(FAT32)

When you open zgemma folder there should be 5 files.
One should say "force" if it says "noforce" you need to change it to force.
 
I used a drive i always use. 8gb TDK. I then tried other drives. All same result. I never tried the force due to it flashing ok apart from this error

Sent from my HUAWEI VNS-L31 using Tapatalk
 
Back
Top