Zgemma h2h sat problems

Rodders86

Inactive User
Joined
Dec 29, 2016
Messages
10
Reaction score
0
Hi i've just bought this box when i've connected it up it has the virgin skin i'm wanting to use it on a motorised 1m dish at the minute how do i go about this is their a list of satellites stored somewere also were do i enter my usals co-ordinates for my location help much appreciated?
 
Cheers ferret will try that. I've just bought a sf-500 sat finder aswell as my dish is out of allignment but i have to program it for thor and astra it asks for lo freq is this 10700 if using a universal lnb? It also asks for 22k on or off and diseqc 1.0 on or off would you have any idea if these need to be on or off? Cheers for the help
 
Ok cheers ferret i don't really understand it ha ha. so do i set the lo frequency in sat finder at 11700 and turn both 22khz off and diseqc 1.0 off? What does the diseqc do? I then have to enter a transponder and polarity i know how to do that but which is the best 1 to tune to for sky astra or thor 0.8w? I bought the sat finder on ebay but it came with american and australia sats programmed no european pretty useless really so having to try programming it myself
 
Ok cheers ferret i don't really understand it ha ha. so do i set the lo frequency in sat finder at 11700 and turn both 22khz off and diseqc 1.0 off? What does the diseqc do? I then have to enter a transponder and polarity i know how to do that but which is the best 1 to tune to for sky astra or thor 0.8w? I bought the sat finder on ebay but it came with american and australia sats programmed no european pretty useless really so having to try programming it myself

Why are you setting up under advance is your motor disecq ? Or 36 volt ?
 
Cheers ferret the problem i have is the dish is out of allignment. I know the darksat supreme motor has a built in sat finder led display but the instructions you get with it aren't very good so not sure how to use it so i bought a sat finder but its come with all asia satellites programmed in not european. Once i get my dish lined up i just have to go into menu-setup-service searching tuner config then enter my co-ordinates? Thanks for helping
 
Back
Top