[DOWNLOAD] Zgemma Tuner Driver Fix

Downloads: A new file has been added by Ferret:

For use on images from the 31/11/15

To correct the no signal issues on 28east

>>> CLICK HERE TO DOWNLOAD Zgemma Tuner Driver Fix <<<

where do files go , i.e what folder please?

lib/modules/4.0.1/extra

bobby123 said:

lib/modules/4.0.1/extra

Click to expand...

thanks Bobby

is this fix needed for all images after 30/10/15

openATV and openvix?

thanks

don't no mate I only have the h1

parkstuart said:

is this fix needed for all images after 30/10/15

openATV and openvix?

thanks

Click to expand...

Only if your image is having signal problems on 28e

Most of the open images now include the fix.

Ferret said:

Only if your image is having signal problems on 28e

Most of the open images now include the fix.

Click to expand...

I thought that issue was with one of the tuner settings ?

oneman said:

I thought that issue was with one of the tuner settings ?

Click to expand...

It is a switching command error im told.

....been having this issue intermittently with my zegemma H1, flashed and re-flashed :handballk for a few days and then suddenly comes up with a tuner error....it ok @ the minute but will give this a go...thanks for sharing:Cheers:

1511ad said:

....been having this issue intermittently with my zegemma H1, flashed and re-flashed :handballk for a few days and then suddenly comes up with a tuner error....it ok @ the minute but will give this a go...thanks for sharing:Cheers:

Click to expand...

This is for the sat boxes only.

Ferret said:

This is for the sat boxes only.

Click to expand...

Hi Ferret, kindly throw some more light on this, the intermittent signal error I get is on the sat side of things, saw your original post and was of the impression that the current tuner driver needs to be updated?, assumed that the combo boxes and the single tuner ones have the same tuner hardware on the sat side? I suppose this is not the case?

As Ferret stated above the Tuner Driver issue is mainly for the Zgemma 2S which is a Twin satellite tuner and only that model is affected the H1 and H2 are only Single satellite tuner models with a DVB-C on the H1 and a DVB-C/T/T2 on the H2 those models and the single tuner S model are unaffecred

apparently, changing tuner a to disecq fixes the issue, too

louis cypher said:

apparently, changing tuner a to disecq fixes the issue, too

Click to expand...

This worked for me, thanks

hi lads been trying to set up my zgemma h2 box but cannot get any signal.

please help im going nuts!!

What is you're setup..? 1 LBN or more?

Thanks for this been experiencing this problem on my H1, tried newer images but still no signal for lnb. Any feedback much appreciated.

jimmyjahooha said:

Thanks for this been experiencing this problem on my H1, tried newer images but still no signal for lnb. Any feedback much appreciated.

Click to expand...

This is no longer needed on the later images. Try box on another dish if possible if not try another lnb on your dish check the f connectors etc.

Thanks for feedback. I connected my blade 7000 to the same connections and all working perfectly. Tearing my hair out as want a complete set up with Tuners A and B working. Been trhough a few images last night but scanning no channels on the sly end.