jtag and lpt prob

[sniggyfish]

hi as my title says i have a driver prob when i run back up dump on nandpro i get error... DLportio.SYS not loaded portio will have no effect i have installed the port95nt.exe im using windows 7 with xennon board .......


Sorted it for anyone who wants to know windows 7 run port95nt in compatbility mode win xp service pack 2 then run as admin

 

[ruddyrum]

Download this here

Extract inpout32.dll from the Win32 folder and put it in your nandpro folder. Rename inpout32.dll to DLPortIO.dll

I know your having issues with DLportio.SYS, but this helped me on my win7 x64 OS

 

[sniggyfish]

arragh i give up i got my xennon to dump loads of times but all mismatch so i deciecded to shorten and tidy up my solderirng now it cant find controller resoldered again and again with no joy i give up for today , 3 days at it so far the worst thing is ive done a falcon before with out much probs :Angryfire

 

[ruddyrum]

I had the same... literally took me 2 days to get the cable together, and actually dump and flash the box!

Check this out if your still getting errors!

I also had to dump 3 times before i got 2 matching dumps, then i had issues with flashing xbr!

all-in-all a bit of a ball ache, but all working well now

 

[jay 210]

ive made up a cable around 18inch long and put the 100 ohm resistors pc end its reads but with errors.
.
is the vga cable needed for this to work ???

 

[ruddyrum]

No, you dont need the vga cable plugged in, as you dont need to turn the console on (i still plugged mine in anyways)

check this out, best way to wire up a jtag - also use diodes aswell as the 100 ohm resistors

 

[PleXo]

no need to use the diode as far as i know.. and you are wiring to an SPI not a JTAG

vga isnt needed for it to work u dont even need to have the dvd drive etc ...

IMO the wires are still too long i would shorten them... mine are about 10cm lol...

 

[jay 210]

No, you dont need the vga cable plugged in, as you dont need to turn the console on (i still plugged mine in anyways)

check this out, best way to wire up a jtag - also use diodes aswell as the 100 ohm resistors

very usefull link great pics thanks alot ...
going to go with the free60.org pic and shorten my cable

 

[homeboycrusoe]

Download this here

Extract inpout32.dll from the Win32 folder and put it in your nandpro folder. Rename inpout32.dll to DLPortIO.dll

I know your having issues with DLportio.SYS, but this helped me on my win7 x64 OS

You sir are a star among stars! Was about to start phaffing around installling Win XP Virtual Mode like others advised. You sorted it for me in like a minute flat.

Big THANKS