ye cheers,aint tried this yet but will tomorrow
[NEW] Liteon Frozen Cant Read Or Flash?? Read My Guide Here
This tut written for iprep V9 iprep.
10.2 and soon TBR 10.7 will differ from v9.
Your drive is blank it now needs to be flashed.
You will need to eject the tray if you have closed it see below.
You will need to use iprep to flash the firmware back.
ALL YOU NEED IS IN MY DOWNLOAD THREAD.
DOWNLOAD THREAD HERE
Making your new firmware.
open jungle flasher and.
1. select load source firmware (your dummy.bin from JF dump)
2. yes to load ixtreme or manually select the liteon ix1.6.bin file.
3. click spoof source to target. (details will be copied across)
4. click save to file
5. You MUST save as
litcfw.bin
Now save this to iprep usb drive folder Backups\1234567\12345
you may need to make the folder 1234567 and then inside that folder create the folder 12345 save the litcfw.bin in there.
Opening the tray: follow pic below then.....
Once you can open the tray pull the tray out fully and push half way back in. Now, hook it up to the PC using
Connectivity Kit and Sata, power on and flash your new firmware.
Flashing your liteon in iprep.
Start iprep and do the following:
1. flit 1234567 12345
2. follow instructions (power cycle drive etc)
3. select W to write firmware
4. type when asked litcfw.bin
Thats it youre flashed.
Trouble shooting!
If you get unknown vendor issue or unkown flash chip:
My guide for Unkown flash chip aka 0x80 FF80 fix.
Unplug all cables from dvd drive count to 4 seconds then replug everything back up.
still no joy:
Reboot pc this time leave drive powered on if pc freezes then you will have to restart with drive off.
Also try erasing your drive with L-O-Eras.exe.
copy the l-o-eras.exe to the root of your iprep usb stick.
start iprep and at the prompt type l-o-eras.exe
EC00 (
replace EC00 with your sata port)
You may need to do this several times until you get the correct drive response. (0x72)