Can't get into Sonic Wall. TZ 190 config page

dibbers

Premium Member
Premium Member
Joined
May 18, 2005
Messages
11,797
Reaction score
1,387
Location
Ipswhich
Ok, i have a Sonic Wall TZ 190 and i just can't get to the config page, it's apperently, 192.168.168.168 but no matter what i can't get into it! i've tried re-setting it and it's booting as i have ethernet activity, i'm just wondering if any disk needs to be installed like on a conole some where, i have a lead on my desk which looks like an ethernet connection on one end and an RS232 on the other, but should i be able to get to it via the lan?

I've tried setting my network ststaic IP address to 192.168.168.100 and trying that but still nothing?

Any ideas? do they need the "console lead" attached to configure them?

link in red above,......
 
had this plugged in direct into the back of me pc and when i do arp -a i see the ip address but the mac address is ff:ff:ff:ff:ff:ff:ff i think it's gooshed...!
 
Hi Dibbers,

Is the routers IP 192.168.168.168 ?

Also whats the subnet? (255.255.255.0)
 
hi matey, according to the PDF that's with it, but as i say i had it installed drirect and arp - a shows


Untitled.jpg
 
Strange....

Try setting you network card IP to 192.168.168.169 and see if you can get onto it.
 
tried and still no config or any thing, if i attach my Internet ethernet to any of the ports and then plug my PC into a spare port i get the internet, all though it's the IP address of my main router as the gateway and the ip address i get is from the linksys router, so that would suggest that this has DHCP disabled, in fact i don't even know if it's got DHCP built into it, weird how all the lights work and the internet does work via it, must be some thing that's staring me in the face, it's as though it's invisable....
 
Back
Top