Transponder off frequency

dalf

Inactive User
Joined
May 22, 2014
Messages
1
Reaction score
0
When I tried a scan with my new Ultimo receiver I hardly found any channels. After some research, I found out what the problem was, all frequencies had to be set a bit off. Example:
At 28,2 the channel CBS Action is at a transponder at 11,222 Mhz. If a do a search with the predefined transponders I find nothing here. If instead I do a search at frequency 11,224 I find all the channels.
The same goes for practically all transponders, predefined transponder frequencies usually give nothing. Setting a frequency slightly higher finds the channels. Obviously, the transponders haven't changed, so the problem is somewhere in my reception. I also have a Dreambox and no problem there, with the same LNB it will find the channels at 11,222 as well as 11,221 or 11,223...

Is this an LNB problem (not likely, considering above).
Is it a hardware problem in the tuner?
Or is it a software problem?

RGDS dalf
 
Back
Top