Hi,
I try to install the Mygica/Geniatech drivers for my USB DVB-C stick T230 om my Sunray Solo2. I tried several images openatv, openpli, openvix,.. but they all give the same error. I found on several forums that the stick is working with older images. I also tied older images but the feeds aren't available anymore.
Example in OpenATV 6.0
opkg --risky install enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230Clone-safe opkg wrapper for Vu+ clones V1.15 (Sunray mode)
enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230: unsatisfied recommendation for kernel-module-si2157
enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230: unsatisfied recommendation for kernel-module-si2168
Installing firmware-dvb-fe-si2168 (1.0) on root.
Downloading 404 Not Found kernel-module-dib0070 (3.13.5) on root.
Downloading 404 Not Found kernel-module-dibx000-common (3.13.5) on root.
Downloading 404 Not Found kernel-module-dib7000p (3.13.5) on root.Downloading 404 Not Found kernel-module-dvb-usb (3.13.5) on root.
Downloading 404 Not Found kernel-module-dvb-usb-cxusb (3.13.5) on root.
Downloading http://feeds2.mynonpublic.com/6.0/vusolo2/vusolo2/kernel-module-dvb-usb-cxusb_3.13.5-.4_vusolo2.ipk.
Installing enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230 (1.0) on root.
Downloading http://feeds2.mynonpublic.com/6.0/vusolo2/all/enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230_1.0-r0_all.ipk.
Configuring firmware-dvb-fe-si2168.
Configuring kernel-module-dib0070.
Configuring kernel-module-dibx000-common.
Configuring kernel-module-dib7000p.
Configuring kernel-module-dvb-usb.
Configuring kernel-module-dvb-usb-cxusb.
Configuring enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230.
Everything went ok!
Done!
lsusb:
Bus 004 Device 002: ID 0572:c688
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 007 Device 001: ID 1d6b:0001
Bus 008 Device 001: ID 1d6b:0001
dmesg:
usb 4-1: new high-speed USB device number 2 using ehci-brcm
usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x86 has invalid maxpacket 188
usb 4-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409
On my zgemma-star 2S, the stick is working fine as the kernel modules are installed.
Who can help me out?
Thanks
Bart
I try to install the Mygica/Geniatech drivers for my USB DVB-C stick T230 om my Sunray Solo2. I tried several images openatv, openpli, openvix,.. but they all give the same error. I found on several forums that the stick is working with older images. I also tied older images but the feeds aren't available anymore.
Example in OpenATV 6.0
opkg --risky install enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230Clone-safe opkg wrapper for Vu+ clones V1.15 (Sunray mode)
enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230: unsatisfied recommendation for kernel-module-si2157
enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230: unsatisfied recommendation for kernel-module-si2168
Installing firmware-dvb-fe-si2168 (1.0) on root.
Downloading 404 Not Found kernel-module-dib0070 (3.13.5) on root.
Downloading 404 Not Found kernel-module-dibx000-common (3.13.5) on root.
Downloading 404 Not Found kernel-module-dib7000p (3.13.5) on root.Downloading 404 Not Found kernel-module-dvb-usb (3.13.5) on root.
Downloading 404 Not Found kernel-module-dvb-usb-cxusb (3.13.5) on root.
Downloading http://feeds2.mynonpublic.com/6.0/vusolo2/vusolo2/kernel-module-dvb-usb-cxusb_3.13.5-.4_vusolo2.ipk.
Installing enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230 (1.0) on root.
Downloading http://feeds2.mynonpublic.com/6.0/vusolo2/all/enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230_1.0-r0_all.ipk.
Configuring firmware-dvb-fe-si2168.
Configuring kernel-module-dib0070.
Configuring kernel-module-dibx000-common.
Configuring kernel-module-dib7000p.
Configuring kernel-module-dvb-usb.
Configuring kernel-module-dvb-usb-cxusb.
Configuring enigma2-plugin-drivers-ct2-dvb-usb-geniatech-t230.
Everything went ok!
Done!
lsusb:
Bus 004 Device 002: ID 0572:c688
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 007 Device 001: ID 1d6b:0001
Bus 008 Device 001: ID 1d6b:0001
dmesg:
usb 4-1: new high-speed USB device number 2 using ehci-brcm
usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x86 has invalid maxpacket 188
usb 4-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409
On my zgemma-star 2S, the stick is working fine as the kernel modules are installed.
Who can help me out?
Thanks
Bart
