How to JTAG Solo2 Clone with Toshiba TC58NVG1S3ETA00 Chip ??

iNNoCeNTdotbe

Inactive User
Joined
Aug 18, 2010
Messages
11
Reaction score
0
Hi,

I successfully Jtagged several Solo2 clones with Samsung Chips (K9F2G08U0A) but it seems not exactly working the same way with Toshiba TC58NVG1S3ETA00.

This is the error message I get:
Jtag Solo2.jpg

This is according to me due:
1) either because the bin file between Samsung chip and Toshiba chip is not the same. If this is true, does anyone have the bin file that works with the Toshiba chip?

2) or the offset (hex) is not 0x00000000.

I can successfully partially or totally erase the chip (erase tab) so i'm pretty sure there are no bad blocks on the chip.

If anyone can help that would be great!! Thank you!
 
Hi,

I successfully Jtagged several Solo2 clones with Samsung Chips (K9F2G08U0A) but it seems not exactly working the same way with Toshiba TC58NVG1S3ETA00.

This is the error message I get:
View attachment 89006

This is according to me due:
1) either because the bin file between Samsung chip and Toshiba chip is not the same. If this is true, does anyone have the bin file that works with the Toshiba chip?

2) or the offset (hex) is not 0x00000000.

I can successfully partially or totally erase the chip (erase tab) so i'm pretty sure there are no bad blocks on the chip.

If anyone can help that would be great!! Thank you!

Unfortunately you'll need to replace the nand, the broadcom software can not handle that error.
 
Hi,

I successfully Jtagged several Solo2 clones with Samsung Chips (K9F2G08U0A) but it seems not exactly working the same way with Toshiba TC58NVG1S3ETA00.


This is the error message I get:
View attachment 89006

This is according to me due:
1) either because the bin file between Samsung chip and Toshiba chip is not the same. If this is true, does anyone have the bin file that works with the Toshiba chip?

2) or the offset (hex) is not 0x00000000.

I can successfully partially or totally erase the chip (erase tab) so i'm pretty sure there are no bad blocks on the chip.

If anyone can help that would be great!! Thank you!

Where is the original thread that describes the method please?
 
I think that ... you have to change the chip
I´m sure!!!
 
HI!
My box has the Toshiba TC58NVG1S3ETA00 NAND. If i need to buy a new nand flash, i have to buy exactly the same or i can buy the Samsung nand flash to replace the Toshiba one?
What do you have to say about this? Thanks
 
HI!
My box has the Toshiba TC58NVG1S3ETA00 NAND. If i need to buy a new nand flash, i have to buy exactly the same or i can buy the Samsung nand flash to replace the Toshiba one?
What do you have to say about this? Thanks

**BUMP**
old thread but the same question from me
 
**BUMP**
old thread but the same question from me

You can buy also samsung chip ..it will work..I replaced bricked vu solo2 with toshiba chip ..flashed samsung chip with lorinson bootloader and box start
 
HI!
I will buy now a new empty samsung [FONT=&quot]K9F2G08U0A chip and replace the bombed toshiba that is in my box.
I only need to replace it and with Broadband studio flash the new bootloader inside it?
I have many BCM files i've downloaded? what is the needed for this samsung chip?
Please help me also in the pinout to connect between vu solo2 SE and cypress board.
Thanks![/FONT]
 
HI!
I will buy now a new empty samsung [FONT="]K9F2G08U0A chip and replace the bombed toshiba that is in my box.
I only need to replace it and with Broadband studio flash the new bootloader inside it?
I have many BCM files i've downloaded? what is the needed for this samsung chip?
Please help me also in the pinout to connect between vu solo2 SE and cypress board.
Thanks![/FONT]

Same advice as above read this

https://www.digitalworldz.co.uk/vu-solo2-receivers-633/392869-solo2-jtag.html

Then in the forum search engine search jtag loads of info
 
Back
Top