Lonrisun box not working properly

Hi,
I have bought a vu+ solo2 from someone that told me it was a genuine box, little did I know when I tried to flash it with an original image it showed HW Error.
After that I tried to install a Sunray image, it showed the same thing, after that I tried the ones of this thread : https://www.digitalworldz.co.uk/dow...653/417656-lonrisun-clonesafe-images-use.html
These 3 images work untill I start doing things like watch a tv program, it freezes with the endless waiting logo.
The blackhole one works best somehow it only blocks so far after searching for channels and you go to your bouquets etc. or if you try and watch any program.
The box came with an OpenPLi image installed on it and worked perfectly,, but I wanted to try something different.
All 3 images have the same symptons as in, if you try and watch any program it freezes with the endless waiting logo untill I reboot manually.
Is there any way to fix this or is my box stuck?

What is your setup? Just $ky 28.2, something else or multisat?

So it only seems to freeze when trying to view channels?

My setup is 5 LNBs, it has 13e,16e,19.2e,23.5e,39e attached to them. It should be multisat.
It freezes with every image, the same symptons like when viewing any channel.
But it also freezes differently for example, when in blackhole I search for any channels and then go to favorites it freezes, but if I do the same with OpenATV or OpenVIX, it doesnt do the same, it works there.
But also with those other 2 it searches but it stops at a certain point like 10% and it wont go on, it doesnt freeze or anything but it just stops and will keep at 10% doesnt matter how much you wait.

Is there anyway you can use just one sat and setup box purely as if you have just one sat (ie disable anything related to multisat). It's a case of trying to narrow down what problem is.

It still tends to freeze, even with just setting it up as single sattelite, it has signal but it freezes when I try to watch a channel on, in this case lnb1 would be 13e.

Have you opened it up and had a look inside? Maybe the flash chip has been replaced but they haven't done a good job? Also download a much older image like ViX 808 and give that a try.

IAmATeaf said:

Have you opened it up and had a look inside? Maybe the flash chip has been replaced but they haven't done a good job? Also download a much older image like ViX 808 and give that a try.

Click to expand...

The OP has used OpenPLI without an issue so it's not box related. I think it's images problem with his multisat setup.

I only use the images for 28.2 setup so can't comment on how good they are at dealing with multisat setups.