Successfully Recoverd Solo2 & Solo2 SE

Aliraza63

Inactive User
Joined
Feb 28, 2013
Messages
341
Reaction score
105
Friends
1.Some days before One of my friend told me that his Solo 2 Se (lonrisun brand ) bricked in Blackhole image . he had just pressed accidently the update when he switched it on back he saw the box was stuck at boot it was nothig act further. he switched again and again but no sign of life in it . he tried more then 5 to 6 time and saw once a box worked but again stucked at Black hole logo and restarted it self and again stuck .
2. I m using Open Pli4 in My Solo2 yesterday i was installing a Plugin Blind scan from Pli feed . My box suddenly stucked and didnt respond me for half an hour when I restarted it was also stucked at Solo2 and did nothing further . I also switched it again and again from back power switch . it just worked for once same like Solo Se 2 . Just showed the Logo and restarted it self .
I had consulted with my friend. She gave me the tool kit and told me to down load How to use HyperTerminal written bootlooder into Flash and read it perform it as shows in this PDF files.


I have used the method according to instruction and luckly recoverd back my Solo 2 and my Friends Solo2 Se . Both boxes are working fine For other members I m pasting pics and Files set for the forum.

1. First of All Install Mcu_ Flash file With the RS-232 Cable from the folder
2. Switch off the Receiver
3. Open Hyper terminal
4. According to PDF guide Connect and load the boot laoder in this folder
5. After Successfull Complete Just Uplaod any Safe Image with Usb
.


 

Attachments

  • SOLO2 FLASH MCU TOOL.rar
    1.4 MB · Views: 302
That's great news.

A few people have mentioned that the Sunray images (eg OpenVix Apollo 126 for Sunray) with patched drivers work fine for Solo2 SE boxes.

Would you be willing to take a chance and try this same image on your normal Solo2 (I assume it has v4 flash)?
 
Last edited by a moderator:
That's great news.

A few people have mentioned that the Sunray images (eg OpenVix Apollo 126 for Sunray) with patched drivers work fine for Solo2 SE boxes.

Would you be willing to take a chance and try this same image on your normal Solo2 (I assume it has v4 flash)?

Yes its working I think I had already told u in any other forum
 
Last edited by a moderator:
Yes its working I think I had already told u in any other forum
I must not have noticed that, thank you.

Is it v4 flash you have on your normal lonrison solo2?
 
I fail to see how this was a bootloader issue though because both boxes were booting to the first splash :confused:

If the bootloader was corrupt it would not get to the splash.
 
as above, when box displays boot screen it aint bricked, when it displays noting and no sign of life from usb then its bricked !
 
Actually, having read this fully instead of just scanning it, I agree with lombard and Ferret. Clone bomb results in no activity except blue light.

What I found with my Sunray is that with original drivers it would start but fail to fully boot unless ethernet was removed. I took this as a built-in safety device to avoid a time sync being done with original drivers and therefore clone bomb from doing it's damage. With patched drivers, my box runs fine.

This is what it sounds like to me - just the built-in security device refusing to allow drivers to work to prevent possible clone bomb.

Of course, it still doesn't mean this doesn't work and hopefully it won't be needed to recover from a clone bomb in future.
 
Last edited:
@Aliraza63:
Did I understand this correctly?
You have written this bootloader to a plain
Lonrisun Vu+ Solo² clone as well, not only Vu+ Solo² SE and it worked?


 
Friends
1.Some days before One of my friend told me that his Solo 2 Se (lonrisun brand ) bricked in Blackhole image . he had just pressed accidently the update when he switched it on back he saw the box was stuck at boot it was nothig act further. he switched again and again but no sign of life in it . he tried more then 5 to 6 time and saw once a box worked but again stucked at Black hole logo and restarted it self and again stuck .
2. I m using Open Pli4 in My Solo2 yesterday i was installing a Plugin Blind scan from Pli feed . My box suddenly stucked and didnt respond me for half an hour when I restarted it was also stucked at Solo2 and did nothing further . I also switched it again and again from back power switch . it just worked for once same like Solo Se 2 . Just showed the Logo and restarted it self .
I had consulted with my friend. She gave me the tool kit and told me to down load How to use HyperTerminal written bootlooder into Flash and read it perform it as shows in this PDF files.


I have used the method according to instruction and luckly recoverd back my Solo 2 and my Friends Solo2 Se . Both boxes are working fine For other members I m pasting pics and Files set for the forum.

1. First of All Install Mcu_ Flash file With the RS-232 Cable from the folder
2. Switch off the Receiver
3. Open Hyper terminal
4. According to PDF guide Connect and load the boot laoder in this folder
5. After Successfull Complete Just Uplaod any Safe Image with Usb
.




Is your Solo2 box an Lonrisun, sunray or dragonworth?
 
This works to repair a HW Error of a clone ??
I have already bought from ebay the JTAG

I try to use the com port but did not work
 
I tried this and the update file 808 downloaded no problem. When i try hyperterminal all i get is stars running through the page when i turn on the reciever. I don't get the message about bootloader download press 012345 what am i doing wrong? Inicdentally mines is bricked no USB ports working at all and i think its a v1 lonrisun
 
Last edited:
I tried this and the update file 808 downloaded no problem. When i try hyperterminal all i get is stars running through the page when i turn on the reciever. I don't get the message about bootloader download press 012345 what am i doing wrong? Inicdentally mines is bricked no USB ports working at all and i think its a v1 lonrisun

you need to change flash chip mate..sorry but thats the only fix.
 
Back
Top