vu+ solo 2 jtag problem

A

asghar ali

Inactive User
Joined
Nov 1, 2014
Messages
21
Reaction score
6
Hi
i have vu + solo 2 time bomb bricked receiver trying to recover with j tag BBS cypress device i have j tag flash file downloaded from vu-hd.com installed broadband studio 3 and bcm 97346 after that successfully connected to samsung flash K9F2G08U0C and also downloaded flash file 100% but still only light on front pannel no usb port working can any one advise me what should next i can do thanks.
here i am attaching inside snaps of my receiver cypress board and jtag screen shot
. vu jtag.jpgIMG_20141204_102046429.jpgIMG_20141204_102105536.jpg
 
Thanks for reply yes it is lorinson board and chip is c this data is on ic
samsung 310
K9F2G08U0C
SCBO
some weeks ago i was successfully recovered solo2 ferrari board with broadband studio 3 in that receiver toshiba TC58NVG1S3ETA00 flash was installed but this time i cant successfully if any body have an other boot loader file so kindly give me so i will try that thanks.
 
asghar ali said:
Thanks for reply yes it is lorinson board and chip is c this data is on ic
samsung 310
K9F2G08U0C
SCBO
some weeks ago i was successfully recovered solo2 ferrari board with broadband studio 3 in that receiver toshiba TC58NVG1S3ETA00 flash was installed but this time i cant successfully if any body have an other boot loader file so kindly give me so i will try that thanks.
Click to expand...



Have a look here various boot loader have been posted in the past

https://www.digitalworldz.co.uk/downloads.php?do=cat&id=21
 
hi
one thing i have noticed that when i flashed box with flash file and box unsuccessful for start and i am trying to connect with broadband 3 bcm it was connected but when trying to connect with flash K9F2G08U0C it shows i/o error and couldnot detect flash after that many time i pressed refresh button some time 7 some time 8 and some time 6 then it was detect flash after that i was perform erase entire flash then easily it will detect the flash ic i could not under stand what is this i think boot loader is wrong for this box thanks...
 
asghar - best to purchase a replacement flash chip m8,

i can repair the box for you if need be.
 
asghar - best to purchase a replacement flash chip m8,

i can repair the box for you if need be.
 
Guys,
Is there any trick needed during connection to tc58nvg1s3eta00 ?
I am always getting "The starting offset is in bad block...." error
 
Ferret said:
Bad block mean the flash is corrupt, sadly this can not be corrected via jtag youll need to replace the chip.
Click to expand...

I have changed to 512Myte flash, resulting I have this:

....dmesg log.........
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
.........

root@vusolo2:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 423.6M 75.7M 347.8M 18% /
devtmpfs 2.0M 88.0K 1.9M 4% /dev
tmpfs 279.3M 264.0K 279.0M 0% /var/volatile
udev 2.0M 88.0K 1.9M 4% /dev
tmpfs 279.3M 0 279.3M 0% /dev/shm

....

Thanks Ferret for the suggestion.
 
satis4action said:
I have changed to 512Myte flash, resulting I have this:

....dmesg log.........
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
.........

root@vusolo2:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 423.6M 75.7M 347.8M 18% /
devtmpfs 2.0M 88.0K 1.9M 4% /dev
tmpfs 279.3M 264.0K 279.0M 0% /var/volatile
udev 2.0M 88.0K 1.9M 4% /dev
tmpfs 279.3M 0 279.3M 0% /dev/shm

....

Thanks Ferret for the suggestion.
Click to expand...

What was the chip ID you ended up using ?
 
You must log in or register to reply here.

Similar threads

B
pls help me i need to know
Replies
11
Views
1K
bboykes
B
segel
jtag solo 2 what went wrong?
Replies
9
Views
838
Spectre
Spectre
D
vu solo 2 image, converted to use on another box?
Replies
0
Views
331
danny121pt
D
H
Vu solo 2 clone issue
Replies
5
Views
760
Ferret
Ferret
K
    • Like
[DOWNLOAD] Black Hole 3.0.2 J with Kodi 16.1 - Sunray Solo 2
Replies
7
Views
4K
donchef79
D
Back
Top