Not trying to get you to suck eggs but just incase mate...
How to flash a Vu+ Solo2. Items you need before we start.
1. A suitable USB stick formatted to FAT32.
2. Image of your choice
3. Compression software such as 7zip.
4. HP Format tool ( not essential but highly recommended )
5. Teracopy ( again not essential but highly recommended )
6. A clean pair of underpants, just in case things go wrong.
For this tutorial we will be using the latest OpenViX Image which can be downloaded from vix
For links to the above mentioned software please see page two of this tutorial.
Preparation.
1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.
3. Open the folder you extracted to your desktop, in this case named openvix-3.0.658-
vusolo2_usb, you will see another folder named vuplus, this is your image file. Copy the entire vuplus folder directly to the USB stick.
Flashing the Receiver.
– Fully power the receiver down via the rocker switch at the rear of the receiver.
– Insert the USB stick containing the image files into one of the USB ports on the receiver.
– Power the receiver on from the rear rocker switch and await instructions.
As your Solo2 starts to power up you should see a prompt on the receivers display asking you to press the power button, at this point you need to press the power button on the front of the receiver, ( the blue circles to the left of the front panel, this is a touch sensitive button ).
Taken from copywrited works by Pheonix