VU+ Solo2 help VU+solo2 clone stock on starting
- Thread starter pikesat
- Start date
is it clone or original re flash will sort it
Simply reflash a image, if your only problem is stuck on starting.
Just make sure you flash the correct image for the manufacture of your clone.
Tuner is Solo2 SE Lonrisun (2015) which is compatible with sunray images. Was V4 flashed and OpenATV 5.0. Now - no signal from LNB on any image (was reflashed from USB many times). LNB checked with other tuner - all good. On connector is 13V an 18V - all good. Think this is software problem, not hardware. Can reflash bootloader via hiperterminal, but can`t find bootloader for my Lonrisun. Help please.
P.S. First boot after any reflash - is incomplete (stopped on splash). Off and ON - reciever started, but no signal and don`t search chanels. Sorry for my english.
It is a well know issue the tuners been misssing on not scanning.
I may not be 100% correct but if you have flashed the v4 update onto that se it will no longer use sunray images.
There are some v4 images in our download section try one of those.
at this moment i can flash any image (Sunray or Lonrisun V4) - they flashing well, but tunners don`t work. May be you have some image to recover tuners? may be i need back to V2 or V3 and flash something old?
Last edited by a moderator:
it was flashed but don`t start - Splash screen (HADES Powered by OpenVix), starting and all...
Last edited by a moderator:
Last edited by a moderator:
can`t download :-( but i have more than 5 messages. Can you upload it to another place? please.
Last edited by a moderator:
You need to wait 24hrs after your 5th post for the forum to update your permissions.
ok. thank you, friend
same result - don`t start... were can i take bootloader for my Lonrisun Solo 2 SE (buy 2015 year, compatable vith Sunray images) to flash it via hyperterminal? may be it bad? on original images from VU (2013 year) it start well and AGC - 83% SNR - 0-99% (channels dont found). On Lonrisun images AGC and SNR - 0%
HELP, PLEASE !
Last edited by a moderator:
same result - don`t start... were can i take bootloader for my Lonrisun Solo 2 SE (buy 2015 year, compatable vith Sunray images) to flash it via hyperterminal? may be it bad? on original images from VU (2013 year) it start well and AGC - 83% SNR - 0-99% (channels dont found). On Lonrisun images AGC and SNR - 0%
I dont think a bootloader has been released i could be wrong. You can only run the v4 update but i suspect you have already ? And that could be the problem that update.
Ok i have found a clone bootloader for hyperterminal see attached there is update guide inside.
I can not test this so use at your own risk.
I can not test this so use at your own risk.
V4 update flashed good many times - no result. will try bootloader. thank you. My friend tell me to try FPGA update. What do you think?
nnetopiersvk
Inactive User
- Joined
- Jul 16, 2015
- Messages
- 4
- Reaction score
- 0
Hi
First try to flash firmware, be carefull, and make it right otherweise you will brick your reciever. Make sure wich version of reciever you have, there may be some differences. If you already tried to flash it and its bricked you have to remove the chip and program it. If its not bricked and you still have same issue you have to flash another firmware, got this same problem on Cloud Ibox II Plus, there were Ver. 1 and Ver 2, When i insert wrong firmware it stuck on boot
First try to flash firmware, be carefull, and make it right otherweise you will brick your reciever. Make sure wich version of reciever you have, there may be some differences. If you already tried to flash it and its bricked you have to remove the chip and program it. If its not bricked and you still have same issue you have to flash another firmware, got this same problem on Cloud Ibox II Plus, there were Ver. 1 and Ver 2, When i insert wrong firmware it stuck on boot
Is there a clone FPGA update available i do not know.
Similar threads
