mick727272
Inactive User
- Joined
- May 1, 2015
- Messages
- 12
- Reaction score
- 0
I bought a Duo at ebay and thought it was an original one.
But now I am not so shur which box it is and which image is the correct one.
It has no stickers on the back and nowhere.
So, how can I tell if its a clone?
And which image should i be using for the box?
I read about v2 and v3, but how can I tell?
I am really a rookie with vu+ and need help.
Tried a couple of USB Sticks and severy images, but none seem to boot up correctly.
I get some error messages on the serail (putty) but I cannot see what they trie to tell me...
Relly puzzled with this box...
Flashing seems to be okay:
BCM73350010
012
Shmoo Version=1.9
MEMC-00000000 RW=00000011 WW=00000044 G=00000001 R=0000000A W=0000001E
MEMC-00000001 RW=0000000D WW=0000004C G=00000001 R=0000000A W=0000000A #$
3
COPY CODE
A567
BCM97335B0 CFE v2.17, CFE core v2.12, Endian Mode: Little
Build Date: Thu Sep 29 12:01:32 2011 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.
writing vfd
DDR Freq: 395MHz
CPU speed: 405MHz
Memory Config: 32+16 non-UMA
Device Tech: 1Gb
Total memory: 384MB
Boot Device: NAND
ECC: Hamming
Total flash: 128MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
CFE initialized.
USB: New device connected to bus 1 hub 1 port 1
USB: Resetting device on bus 1 port 1
USB: Locating Class 08 Vendor 0EA0 Product 2168: Mass-Storage Device
USBMASS: Unit 0 connected
checking usb
Reading usbdisk0:/vuplus/duo/cfe_cfe_auto.bin: >> Skipping...: File not found
Reading usbdisk0:/vuplus/duo/root_cfe_auto.jffs2: >> Done. 72351744 bytes read
========================================================================
nand_erase_block 0x19580000 0x20000 done
nand_erase_block skipping: at blk addr = 0x19580000
nand_erase_block 0x1b740000 0x20000 done
nand_erase_block skipping: at blk addr = 0x1b740000
========================================================================
Programming...
done. 72351744 bytes written0x20000 done
Reading usbdisk0:/vuplus/duo/boot_cfe_auto.jffs2: >> Skipping...: File not found
Reading usbdisk0:/vuplus/duo/kernel_cfe_auto.bin: >> Done. 3625078 bytes read
Programming...
done. 3625078 bytes written 0x20000 done
please remove usb first and reboot
:Chainsaw:
Here is one of the messages after rebooting:
CPU 0 Unable to handle kernel paging request at virtual address c0804b88, epc == c0804b88, ra == c0760414
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008300 87626c00 c0804b88
$ 4 : 88eb8000 00000000 00000004 001a0340
$ 8 : 00000060 00000020 0000000c c0760230
$12 : 00000030 00000000 810ede14 8110af14
$16 : 8762a280 00103000 884cdb00 884e1c00
$20 : 00000002 00000000 c075e3e8 00000001
$24 : 80687044 00000000
$28 : 88e10000 88e11bb0 ffffffff c0760414
Hi : 00000000
Lo : 00000000
epc : c0804b88 0xc0804b88
Tainted: P
ra : c0760414 0xc0760414
Status: 10008303 KERNEL EXL IE
Cause : 00800008
BadVA : c0804b88
PrId : 0002a044 (Brcm4380)
Modules linked in: procmk
Process modprobe (pid: 61, threadinfo=88e10000, task=88e06dc0, tls=77f9a490)
Stack : 00000068 c08a4cf8 c0b4000f 80002948 00000044 c075fc74 c075efdc 87626c00
c0b39af0 00000001 88e11c08 8055b0d0 8007a040 c0b228c4 8055b170 c0b39b28
c0b39b10 c072b0d8 0000000c 8007a168 0001ffff 00000000 00001000 00000000
00000000 00000100 0000000c 00001000 c0b39bb8 0000000d 00000000 00000020
00000060 00000024 c0b228b4 00010000 8065aa40 8065adb0 00000001 00000002
...
Call Trace:
[<80002948>] plat_irq_dispatch+0xb8/0x110
[<8055b0d0>] _raw_spin_lock_irqsave+0x0/0x50
[<8007a040>] enable_irq+0x0/0x8c
[<8055b170>] _raw_spin_unlock_irqrestore+0x0/0x44
[<8007a168>] __disable_irq_nosync+0x48/0x70
[<8003c464>] tasklet_hi_action+0x38c/0x41c
[<8003cf10>] __do_softirq+0x100/0x1d0
[<8007bf24>] handle_level_irq+0xd8/0x16c
[<8002266c>] check_preempt_curr+0x84/0xa8
[<80072eac>] module_sect_show+0x0/0x18
[<8003d2c4>] do_softirq+0xa4/0xac
[<80072eac>] module_sect_show+0x0/0x18
[<80558948>] schedule_timeout+0x1b4/0x214
[<80002700>] brcm_intc_dispatch+0x90/0x220
[<80023d14>] __wake_up+0x40/0x60
[<80002964>] plat_irq_dispatch+0xd4/0x110
[<80004ee4>] ret_from_irq+0x0/0x4
[<80072eac>] module_sect_show+0x0/0x18
[<8008ba60>] free_hot_cold_page+0x1f0/0x2b0
[<8008ba90>] free_hot_cold_page+0x220/0x2b0
[<802c4614>] kref_put+0xd8/0x120
[<800b5574>] __vunmap+0x78/0x11c
[<8005e9e8>] blocking_notifier_call_chain+0x14/0x20
[<80074e74>] sys_init_module+0x240/0x14a0
[<8000e9fc>] stack_done+0x20/0x40
[<802cf078>] __bzero+0xbc/0x164
Code: (Bad address in epc)
---[ end trace d7ed933962f6d3aa ]---
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 180 seconds..
But now I am not so shur which box it is and which image is the correct one.
It has no stickers on the back and nowhere.
So, how can I tell if its a clone?
And which image should i be using for the box?
I read about v2 and v3, but how can I tell?
I am really a rookie with vu+ and need help.
Tried a couple of USB Sticks and severy images, but none seem to boot up correctly.
I get some error messages on the serail (putty) but I cannot see what they trie to tell me...
Relly puzzled with this box...
Flashing seems to be okay:
BCM73350010
012
Shmoo Version=1.9
MEMC-00000000 RW=00000011 WW=00000044 G=00000001 R=0000000A W=0000001E
MEMC-00000001 RW=0000000D WW=0000004C G=00000001 R=0000000A W=0000000A #$
3
COPY CODE
A567
BCM97335B0 CFE v2.17, CFE core v2.12, Endian Mode: Little
Build Date: Thu Sep 29 12:01:32 2011 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.
writing vfd
DDR Freq: 395MHz
CPU speed: 405MHz
Memory Config: 32+16 non-UMA
Device Tech: 1Gb
Total memory: 384MB
Boot Device: NAND
ECC: Hamming
Total flash: 128MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
CFE initialized.
USB: New device connected to bus 1 hub 1 port 1
USB: Resetting device on bus 1 port 1
USB: Locating Class 08 Vendor 0EA0 Product 2168: Mass-Storage Device
USBMASS: Unit 0 connected
checking usb
Reading usbdisk0:/vuplus/duo/cfe_cfe_auto.bin: >> Skipping...: File not found
Reading usbdisk0:/vuplus/duo/root_cfe_auto.jffs2: >> Done. 72351744 bytes read
========================================================================
nand_erase_block 0x19580000 0x20000 done
nand_erase_block skipping: at blk addr = 0x19580000
nand_erase_block 0x1b740000 0x20000 done
nand_erase_block skipping: at blk addr = 0x1b740000
========================================================================
Programming...
done. 72351744 bytes written0x20000 done
Reading usbdisk0:/vuplus/duo/boot_cfe_auto.jffs2: >> Skipping...: File not found
Reading usbdisk0:/vuplus/duo/kernel_cfe_auto.bin: >> Done. 3625078 bytes read
Programming...
done. 3625078 bytes written 0x20000 done
please remove usb first and reboot
:Chainsaw:
Here is one of the messages after rebooting:
CPU 0 Unable to handle kernel paging request at virtual address c0804b88, epc == c0804b88, ra == c0760414
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008300 87626c00 c0804b88
$ 4 : 88eb8000 00000000 00000004 001a0340
$ 8 : 00000060 00000020 0000000c c0760230
$12 : 00000030 00000000 810ede14 8110af14
$16 : 8762a280 00103000 884cdb00 884e1c00
$20 : 00000002 00000000 c075e3e8 00000001
$24 : 80687044 00000000
$28 : 88e10000 88e11bb0 ffffffff c0760414
Hi : 00000000
Lo : 00000000
epc : c0804b88 0xc0804b88
Tainted: P
ra : c0760414 0xc0760414
Status: 10008303 KERNEL EXL IE
Cause : 00800008
BadVA : c0804b88
PrId : 0002a044 (Brcm4380)
Modules linked in: procmk
Process modprobe (pid: 61, threadinfo=88e10000, task=88e06dc0, tls=77f9a490)
Stack : 00000068 c08a4cf8 c0b4000f 80002948 00000044 c075fc74 c075efdc 87626c00
c0b39af0 00000001 88e11c08 8055b0d0 8007a040 c0b228c4 8055b170 c0b39b28
c0b39b10 c072b0d8 0000000c 8007a168 0001ffff 00000000 00001000 00000000
00000000 00000100 0000000c 00001000 c0b39bb8 0000000d 00000000 00000020
00000060 00000024 c0b228b4 00010000 8065aa40 8065adb0 00000001 00000002
...
Call Trace:
[<80002948>] plat_irq_dispatch+0xb8/0x110
[<8055b0d0>] _raw_spin_lock_irqsave+0x0/0x50
[<8007a040>] enable_irq+0x0/0x8c
[<8055b170>] _raw_spin_unlock_irqrestore+0x0/0x44
[<8007a168>] __disable_irq_nosync+0x48/0x70
[<8003c464>] tasklet_hi_action+0x38c/0x41c
[<8003cf10>] __do_softirq+0x100/0x1d0
[<8007bf24>] handle_level_irq+0xd8/0x16c
[<8002266c>] check_preempt_curr+0x84/0xa8
[<80072eac>] module_sect_show+0x0/0x18
[<8003d2c4>] do_softirq+0xa4/0xac
[<80072eac>] module_sect_show+0x0/0x18
[<80558948>] schedule_timeout+0x1b4/0x214
[<80002700>] brcm_intc_dispatch+0x90/0x220
[<80023d14>] __wake_up+0x40/0x60
[<80002964>] plat_irq_dispatch+0xd4/0x110
[<80004ee4>] ret_from_irq+0x0/0x4
[<80072eac>] module_sect_show+0x0/0x18
[<8008ba60>] free_hot_cold_page+0x1f0/0x2b0
[<8008ba90>] free_hot_cold_page+0x220/0x2b0
[<802c4614>] kref_put+0xd8/0x120
[<800b5574>] __vunmap+0x78/0x11c
[<8005e9e8>] blocking_notifier_call_chain+0x14/0x20
[<80074e74>] sys_init_module+0x240/0x14a0
[<8000e9fc>] stack_done+0x20/0x40
[<802cf078>] __bzero+0xbc/0x164
Code: (Bad address in epc)
---[ end trace d7ed933962f6d3aa ]---
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 180 seconds..
Last edited: