Can not get My Vu+ Duo to work HELP please.

ILoveVuBox

Inactive User
Joined
Jan 26, 2011
Messages
11
Reaction score
0
I have just got a new Vu+Duo DVSB-2 (Twin Twiner) Box and today
flashed it with 1.3 VIX Image keeping in view your instructions and
successfully flashed the VIX image.
I then proceeded to 'Configuration' after selecting Language. I have a
'Sky Fixed Dish' currently hooked up to standard offcial Sky Digi Box
However, I'm assuming my current Dish 'Already' points to Astra 28.2E
So, When I connect my Vu+ Duo STB (One Cable plugged into LNB1 A tuner
only) in the Box when configuring Tuner A. I selected 'Simple' and then
'Single'. Then selecting satellite Astra (28.2E) and DiseqC.... no. I
put it on 'auto scan for the services' result. Unfortunately, I am still
unable to get any result (See Image below)and every time I scan get
the same reply 'scan finished, '0' services found". I'm confused how
can I get the result enabling me to proceed further ? Please help me.
Thank you!

photo.JPG


Off topic question: Are those Sat Dishes that Sky install for users
even good for these Vu+ Duo boxes? Do I need to get motorised and
different LNB etc? If so, Can you recommend me the items I need to
get. Since I've spent £300+ on this box I'm sure getting Motorised
dish wouldnt hurt too much plus it'll give me the Flexibility for
more coverage oppose to fixed.

Thanks.
 
I had my cable's slightly setup wrong. Ok now for update so far::Clap:

1) Re-started the Vu+ Duo after checking my cables from LNB to the Box all connected tightly.

2) Set the Tuner A: Config Simple
Mode: Single
Sat: Astra 28.2E and Eurobird

3) Went to Service Scan>Automatic Scan.
1048 Service Found 100% completed.
Pressed Exist>Exist till I was on the Vu+ Duo Loading Enigma II...Wallpaper.

4) Switched off from behind the STB without 'Rebooting from the remote control instead.'

5) Switched on the Receiver from the back, Starting.......DVB Service. Then go the msg again saying "No service 3sec msg pop'.

What Do I need to do now from here on? Have I lost the Service scan result that I had got perivously? At What point should I install CCcam plugin?

I understand I need to create a file from notepad called "CCcam.cfg", Question: What do I need to save inside this document as I'm not sure also what is Cline please?

Many thanks for the kind help, the ball is finally rolling.
 
what is it u are struggling with ?

u shud be getting free to air channels now...goto ALL services and try bbc 1 or sommat ?
 
Last edited:
You don't have to reboot after a scan, just press exit on remote, and pick a programme to watch.
 
Guys, Manage to get channels and boquets up and running but When I select the Channel I can not get picture i.e: Sky channels, mtv etc..

I've now gone to the Plugins and addons Downloaded the CCcam 2.2.1 and installed it. Pressed the Blue button and activated it too. But theres some other ones I can not get it to work like:

Could you please explain to me how I could decode the encrptyed channel's on my STB with VIX 1.3 Image and what steps to take? Now I'm not sure what to do next...Any help would be great.

Currently I have these on my box:

rooty.jpg


and

softcam.jpg


many thanks in advance.
 
That CCam.cfg is Empty inside - just blank doc file.

that is the problem then ...... !!

your cccam.cfg needs this info


################################
# CCcam.cfg file
#

{Put the cline info here} << YOUR SERVER DETAILS !!!

#
# end of CCcam.cfg file
################################


copy and paste all that at the top of your cccam.cfg file , and u MUST put your own server/sub details into the cline info.

EDIT without these details , you will only ever get free to air channels .
 
that is the problem then ...... !!

your cccam.cfg needs this info


################################
# CCcam.cfg file
#

{Put the cline info here} << YOUR SERVER DETAILS !!!

#
# end of CCcam.cfg file
################################


copy and paste all that at the top of your cccam.cfg file , and u MUST put your own server/sub details into the cline info.

EDIT without these details , you will only ever get free to air channels .

Do I need to put my LAN server details? Like:

192.168.1.117 80 root password

as above?^^ Is that called 'Cline'?
 
Do I need to put my LAN server details? Like:

192.168.1.117 80 root password

as above?^^ Is that called 'Cline'?

no mate thats not a c-line.

to get a c-line some one has to physically share their card with you. they create a f-line that they put into their config file and they make a corresponding c-line that they give to you. that way your box connects to theirs in order to share their card.
 
no mate thats not a c-line.

to get a c-line some one has to physically share their card with you. they create a f-line that they put into their config file and they make a corresponding c-line that they give to you. that way your box connects to theirs in order to share their card.

aah Okay, hrmm, sorry if to come across as a n00b
thanks.:proud:
 
Last edited by a moderator:
Can you please read the announcement at the top of each room please

I know you are new mate but please can you check the rules, stickies and announcements

:)
 
Can you please read the announcement at the top of each room please

I know you are new mate but please can you check the rules, stickies and announcements

:)

yeah...cheers rat..
i know we are treading on ice with this topic.
Hopefully the op has a better idea now .
If the op is still struggling please PM me i am happy to help u get up and running .
 
we can all give advice and help :)
but we must remember the legal side of things too ;)
 
yeah...cheers rat..
i know we are treading on ice with this topic.
Hopefully the op has a better idea now .
If the op is still struggling please PM me i am happy to help u get up and running .

Chris sent you an email earlier today, not sure if you received that?
 
Hrmm, Does NewCamd5.25 work with our Vu+ Duo? I can not seem to find info about this?
 
Hrmm, Does NewCamd5.25 work with our Vu+ Duo? I can not seem to find info about this?


it should run any cam thats available once it is set up correctly. regards mdt
 
Hrmm, Does NewCamd5.25 work with our Vu+ Duo? I can not seem to find info about this?
probably u were looking for the wrong thing :)
NewCamd5.25 is the name of a sharing protocol, not just cam
MGcamd 1.35 (and earlier versions aswell) does support newcamd 5.25 protocol , CCCAM does , oscam etc.
 
Last edited:
Back
Top