Zgemma H5.2S Failing

[topchippyles]

Yes. All looking ok at the mo'. However it would run ok for a day tr two before failure, so will give it a few days before claiming success. Replaced the PSU with one I had from a older H2s box.

You can always flash the box with a pre build and all the settings will be done then,A few out there like wooshbuild,Willobuild,Grogbuild to name a few

 

[vinegarjoe]

Not really sure what you mean. Is this something different to OPenATV??

 

[river4ever]

Not really sure what you mean. Is this something different to OPenATV??

All them “builds” that have been mentioned are builds and builds only.
It is irrelevant if you run them builds as there “just builds” from OpenATV.
Also your timeshift is most likly not working after due to reflashing and storage has not been mounted.

What is temperature reading from STB?

 

[vinegarjoe]

For info. When I re-flashed the box I disconnected the 500Gb HDD I use for recordings. Lot of stuff on there I don't really want to lose. Is there any way of "re-mounting" the HDD without losing all that data???
Where do I get the temp reading from the box??

Thx for your help

 

[river4ever]

FTP to HDD and copy it on computer.
Been long time using E2 box for myself. I do recall all them years ago when i had E2 the zgemma i got was wrapped in plastic above vents, it is that tightly wrapped you would not notice.
The temperature is in setting somewhere. OpenATV does display the heat from STB.
Look in settings.

 

[vinegarjoe]

Defo removed the plastic coating , but will try and find the temp setting.

 

[vinegarjoe]

Failed again last night, so doesn't look like at was a PSU problem after all.

 

[vinegarjoe]

Processor temperature is 73ºC

 

[vinegarjoe]

Will give it a bit more time before condemning it!!!