Xbox phat modding advice / help

fes_786

Inactive User
Joined
Nov 30, 2005
Messages
3,894
Reaction score
278
Location
uk
Hi

Been out of the modding scene for so long don't have much of a clue

I have a Xbox 360 Falcon
Dashboard 2.0.13599.0

I want to mod it so I can play games of a hard drive

I've done abit of reading up and I think I need a executer cr4?

But once that's installed do I need to read nand or flash it??

Sorry if these questions sound too nooby lol

But last time I did a Xbox it was flashing it with jungle flasher ..... Now I don't know we're to start

Wouldn't mind a nudge in the right direction for tuts
And also were is best place to buy cr4 in uk??

Thanks
 
You will be performing an RGH.


The CR4 is one of the varietietis of glicth chips. Whichever chip you use, you will need to read the nand. Create an ECC file, write it to the nand. You can then create a modified image and flash that.
 
We're is best place to buy in uk??

Mr mod chips
Mr console
Mod chip central

All these 3 have bad bad reviews???
 
Anyone?? Or nobody visits these sections anymore? Lol
 
Yes we visits these section all the time m8

Have a look at this

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

you will have to get a J-R Programmer v2 as well to flash the chip

here is a list from places to buy them from

Code:
You don't have permission to view the code content. Log in or register now.


download this as well its had

J-Runner v3 (5) Core Pack.rar

its got info how to flash your box on it as well

Code:
You don't have permission to view the code content. Log in or register now.


There is a member on here m8 called dave24 he used to RGH members xbox360 , don't no if he still does them , but give him a pm and ask ?

will save damaging your 360
 
Last edited by a moderator:
Thank you m8

I can solder no problem so won't be damaging it lol

Will order the kit cheers
 
I've ordered the jrunner v2
And cr4 xl

Install is very simple
Can't wait for it to arrive [emoji41]
Been a while since I tinkered with a console
 
The divers for the jrunner v2 is in the J-Runner v3 (5) Core Pack

C:\Users\spud\Downloads\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\common\drivers

If your running windows 8 or 10 you will have to Disable Driver Signature Enforcement in Windows

Code:
You don't have permission to view the code content. Log in or register now.

If you don't Disable Driver Signature you will get a error when installing the drivers m8
 
To program the jrunner v2

have the jrunner v2 connected to your pc , run JRunner.exe ,then click onto JR-P tab , click power on , then click onto Bootloader mode

next go to Tools tab , Update JR-P fw a window will open and the flash file is in the \common folder

PICFLASH_E_1_0_5-JRP-V2.HEX

then it will flash your jrunner v2
 
I've ordered the jrunner v2
And cr4 xl

Install is very simple
Can't wait for it to arrive [emoji41]
Been a while since I tinkered with a console

Hi mate,

Can I ask where you got your CR4 XL from?

Think I need to get hold of one for a slim trinity
 
I ordered from
Shop01media.com

They supposed to be based in Sweden

According to there email they've posted my kit
 
Nice one mate. Let us know how you get on with it.
 
ive received my cr4 xl and jr programmer

ive managed to dump nand

but now im stuck, there is only the red power light on solid on the cr4 the debug light dosnt even turn on???

I can't get it to load exel to get cpu key
when I write modded file back and power xbox on it just stays stuck on green light with no video .etc

with original dump it boots up ok

i think i might have installed it wrong??

i got a qsb but it was shorting out so did a wire install

anybody care to upload or direct me to a R JTAG tut for cr4 xl using only wires no qsb for falcon??

thanks
 
Last edited:
Should have stuck to RGH 1.2, any cheap glitcher and only 3-4 wires install and using RGH 2.0 files. Instant boot just like the old skool RGH 1.
 
Pretty sure he can still RGH 1 his console. He has dashboard 13599

What is the best way forward now?
 
yip he could of done a old coolrunner , but them new cr4 xl are supported to be amazing and well fast booting up ect


plus if the console ever brakes down he can then use it on a different console and any dash
 
Last edited:
Been looking about
I think I need to do a RGH 2 install

Will try it and hopefully it does the trick
 
J-Runner v3 (5) click onto cr4 as well


so you got the stuff now ?
 
Yeh got the stuff

Wired up as RGH2
Used Glitch 2 with cr4 ticked
But still won't boot exel!!

Wiring is 100% ok

Green light flashing on cr4 as if it's working
Tried different dip settings .etc but still won't boot exell

Boots original nand ok

Updated to 17489 and still same !

Been looking on the net and it seems a lot of people having problems with cr4 xl and phat consoles??
 
Last edited:
Back
Top