meanie
Inactive User
my epg just dont seem to ever be the right times for the programs its always a hour out any ideas
Wrong timetable
- Thread starter meanie
- Start date
marty
Inactive User
Is this only since the clocks went forward?? Try setting the time in the time settings to GMT +1 and usage ON
Make sure you save settings on exit, if the problem is still there turn the power off to the box at the socket and wait a few seconds, switch back on and hopefully it will then set itself and all will be correct
Make sure you save settings on exit, if the problem is still there turn the power off to the box at the socket and wait a few seconds, switch back on and hopefully it will then set itself and all will be correct
meanie
Inactive User
tried that makes no differance 
Try this mate i had the same problem and just got it working now, my EPG was showing as 1900 not 2000.
1. Set time GMT+1 and usage ON
2. Go to installation, user installation.
3. Press red button to preform an autoscan.
4. When autoscan completes, IMMEDIATELY go to time settings again.
5. Make sure time is still correct.
6. Turn GMT Usage off
7. Press blue button to save and exit.
8. Check EPG should now display correct time.
roud::Clap:
1. Set time GMT+1 and usage ON
2. Go to installation, user installation.
3. Press red button to preform an autoscan.
4. When autoscan completes, IMMEDIATELY go to time settings again.
5. Make sure time is still correct.
6. Turn GMT Usage off
7. Press blue button to save and exit.
8. Check EPG should now display correct time.
roud::Clap:
meanie
Inactive User
thanks robc11 that sorted it out :Clap:
meanie
Inactive User
yeah know what you mean this time im gunna save my listing but how i do that ?
- Joined
- Feb 9, 2007
- Messages
- 1,893
- Reaction score
- 70
Use a null modem cable and prog called voxer.exe or DNUPMAN.exe to connect to your pc and import your settings. Delete and re-arrange as required and export your channel list back to your box.
