Wrong IP address on nanostation loco

calisto

VIP Member
VIP Member
Joined
Feb 8, 2006
Messages
1,204
Reaction score
173
Hi,

am trying to set up two nanostation loco 5g. When you power up the station over poe it is meant to give you a static up address of 192.168.1.20 but gives me an IP address of 257.197.347.890 & of course cannot connect to it to change settings. Anyone got any ideas please?
 

janobi

Janet to us
VIP Member
Joined
Jan 25, 2006
Messages
9,415
Reaction score
1,409
Location
Work.... Where else?
You sure that's the IP you've gotten? It makes no sense at all, as it can't go higher than 255 in any of the octets. Is the .20 IP already used on the network?
 

calisto

VIP Member
VIP Member
Joined
Feb 8, 2006
Messages
1,204
Reaction score
173
Hi,

got the IP to 192.168.1.57 but cannot connect to it as my VM range is 192.168.0
 

calisto

VIP Member
VIP Member
Joined
Feb 8, 2006
Messages
1,204
Reaction score
173
You're missing an octet at the end of IP. Have you setup ip ranges for things?

Cheers for reply m8, the person has taking them back & run an Ethernet cable instead, a lot easier.
 
TEST
Top